High-quality 40 mm aluminum cylinder with Nikasil coating for fan-cooled Kreidler Florett Super TS, Mustang (1965–1969), Kreidler Florett GT–TM, and other small motorcycles.
The cylinder kit can also be installed as a tuning cylinder in Kreidler models such as the K 54, K54 0, K54 0M, K 54/2A, LF – LF, LH K 54/32, etc.
The cylinder was designed to be nearly identical to the original Zeta cylinder with 5.8 PS. The durable cylinder delivers strong torque and solid performance even at high RPMs.
Scope of delivery as shown in Figure 1, including cylinder, piston kit, and gasket set.
Exhaust flange diameter: 32 mm
; Intake port: 15 x 25 mm
; Intake stud spacing: 32 mm
; Piston pin diameter: 14 mm
; Mounting hole pattern: 43.5 x 43.5 mm
Note: Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
Brand-name product from the manufacturer NC-MOTORPARTS.
| Nominal diameter | 40 mm |
| Manufacturer | NCMotorparts |
| Material | Aluminum |
| Surface | sandblasted |
| Ø Outlet outside | 32 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 32 mm |
| Ø piston pin (B) | 14 mm |
| Outlet type | clamped |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 44 x 44 |
| Camouflaged | No |
| Area of application | Tuning |
| Kreidler |
Accessories & related products
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Diameter: 5.95 mm · Strength class: 10.9 · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Total length: 30 mm · Nominal diameter (thread): 6 mm · Thread length: 12 mm
EUR 2.05
Rito crankshaft Kreidler Florett K3 42 mm stroke
Manufacturer: Rito · Cheek type: standard · Crankshaft stroke: 42 mm · Connecting rod length center-center: 85 mm · Total length of crankpin on clutch side: 64.2 mm · Total length crankpin ignition side: 63.8 mm · Ø piston pin (B): 14 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Wide crank webs: 39.9 mm · Number of gears: 3 pcs · Number of gears: 4 pcs · Number of gears: 5 pcs · Area of application: Standard
EUR 298.20
44 mm tuning cylinder | Kreidler Florett RS, RMC
Nominal diameter: 44 mm · Material: Aluminum · Surface: sandblasted · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 47 mm · Ø piston pin (B): 14 mm · Outlet type: slanted · Hole spacing outlet: 50 mm · Camouflaged: No · Area of application: Tuning
EUR 332.60
EUR 275.20
Parmakit 44 mm cylinder kit tuning | Kreidler Florett RS, RMC
Nominal diameter: 44 mm · Manufacturer: Parmakit · Material: Aluminum · Surface: sandblasted · Ø Outlet outside: 32 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 47 mm · Ø piston pin (B): 14 mm · Outlet type: clamped · Number of fixing points: 4 pcs · Camouflaged: No · Area of application: Tuning
EUR 344.10
Explore categories from Cylinder
Moped fans also bought
swiing® revival light switch MERIT two buttons
Manufacturer: GPO · Housing material: Steel · Substructure material: Plastic · Surface: chrome-plated · Color: Chrome · Color: black · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Number of positions: 3 pcs · Ø Handlebars: 22 mm · Total length: 55 mm · Width: 27 mm · Height: 30 mm
EUR 21.70
Not in stock
Speedometer 120 km/h Ø 60 black / chrome
Material: Metal · Material: Plastic · Surface: chrome-plated · Color: Chrome · Color: black · Color: white · Maximum speed: 120 Km/h · Lighting: without · Signal type Tacho: analog · 4-edge speedometer cable: 1.8 mm · Thread type: MF10x1 (fine pitch thread) · Ø Receptacle: 60 mm · Ø outside: 64.8 mm · Depth: 50 mm · Total height: 70 mm
EUR 108.90
Working late? Evening hours on Thursday until 20:00
