Throttle cable elbow, including cable adjustment screw, compatible with various mopeds and small motorcycles equipped with Bing 85, 17, or 18 carburetors.
These carburetors are installed on the Puch X30 Sport, Puch Supermaxi LG1 & LG2, Sachs 503 ADV, and Sachs 504 / 535 mopeds.
The throttle cable guide tube features an M7 x 0.75 mm mounting thread.
You can find additional carburetor bends and throttle cables in the accessories section.
| Width across flats nut | 10 mm, 8 mm |
| Material | Brass |
| Component group Carburetor | Adjusting screws, float, etc. |
| Carburetor type | 85, 18 Catalyst |
| Total length | 47 mm, 53.5 mm |
| Ø outside | 7 mm |
| Height | 29 mm |
| Thread type | MF7x0.75 (fine pitch thread) |
| Angle | 90 ° |
| Internal thread | MF6x0.75 (fine pitch thread) |
| Pony OEM number | A2066 |
| Sachs OEM no. | 0261 132 000 |
| Puch | E50 ZA50 (air-cooled) |
| Sachs | 503 - ADV 535 |
Accessories & related products
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
EUR 2.75
Dell'Orto 90° carburetor pipe bend set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Height: 27 mm · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 ° · Total length: 43 mm · Total length: 52 mm
EUR 13.70
Dell'Orto 50° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Height: 40 mm · Height: 48 mm · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 50 ° · Total length: 36.5 mm · Total length: 42 mm
EUR 13.70
Dell'Orto 40° carburetor elbow set M6x0.75
Total length: 30.5 mm · Total length: 37.5 mm · Height: 57 mm · Height: 67 mm · Ø outside: 6 mm · Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 40 ° · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread)
EUR 13.70
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Height: 35 mm · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 80 ° · Total length: 41.5 mm · Total length: 50 mm
EUR 7.90
BING 90° carburetor pipe bend M7x0.75 NOS
Manufacturer: BING · Width across flats nut: 9 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Angle: 90 ° · Ø outside: 7 mm · Height: 25 mm · Carburetor type: 85 · Total length: 38 mm · Total length: 45 mm · Thread type: MF7x0.75 (fine pitch thread) · Internal thread: MF6x0.75 (fine pitch thread) · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 28.60
90° carburetor pipe bend M7x0.75
Width across flats nut: 8 mm · Width across flats nut: 10 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: 18 Catalyst · Carburetor type: 85 · Height: 29 mm · Total length: 47 mm · Total length: 53.5 mm · Ø outside: 7 mm · Thread type: MF7x0.75 (fine pitch thread) · Internal thread: MF6x0.75 (fine pitch thread) · Angle: 90 ° · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 13.70
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Total length: 40 mm · Total length: 49 mm · Ø outside: 6 mm · Height: 32 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 °
EUR 7.90
Moped fans also bought
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Cable length: 2200 mm · Nipple length: 5 mm
EUR 2.75
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Number of components: 1 pcs · Nipple length: 10 mm
EUR 2.75
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Total length: 6 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.30
GPO 85° Carburetor Elbow M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Height: 30 mm · Total length: 45.5 mm · Total length: 53.5 mm · Ø outside: 6 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: M5x0.8 (standard thread) · Angle: 85 ° · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 6.75
Magura Cable Clamp Ø 6 x 9 mm
Manufacturer: Magura · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Ø Cable bushing: 2.5 mm · Drive: External hexagon · Drive: Slot · Total length: 9 mm · Screw head: Hexagon · Ø outside: 6 mm · Thread type: M4x0.7 (standard thread) · Width across flats: 6 mm · Thread length: 5 mm · Magura OEM number: 301 190
EUR 2.30
swiing® revival 90° carburetor pipe bend M6x0.75
Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Total length: 40 mm · Total length: 49 mm · Ø outside: 6 mm · Height: 32 mm · Thread type: MF6x0.75 (fine pitch thread) · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 90 °
EUR 7.90
Working late? Evening hours on Thursday until 20:00
