Professionally machined Racing ADDY E50 4-bearing engine case with GME (case-diaphragm intake) for your Puch moped.
This racing crankcase is the “der.prüfstand” edition, produced exclusively for mofakult. The massive 39.5 x 26 mm intake, combined with the dedicated diaphragm system, delivers plenty of power. No modifications to the Puch Maxi frame are required to install the engine.
The ADDY racing crankcase was specifically designed and manufactured for the tuning market; therefore, some components—such as the mounting surface for a kickstarter—have been omitted.
The cylinder head features the following special characteristics:
- an enlarged sealing surface in the area of the cylinder base
- crankcase bolts slightly offset outward, leaving more space for larger overflow channels
- Larger GME intake
- Alignment pins for secure positioning when assembling the housing halves
- Additional threads for more flexible ignition installation
- Extra-large cooling fins in the lower section for better heat dissipation and thus reduced wear on the crankshaft bearings
- Stand mount, 3 M6 threads at the original spacing
- Approved for all SAM moped racing and moped cross categories
- Cylinder stud hole pattern: 44 x 44 mm
Installation tips:
- Using the included washers, different gear wheels with varying positions—such as those in 3-bearing or MBR transmissions—can be properly spaced. Before assembly, be sure to check that the gear wheel is properly centered.
- Use the following screw lengths: 7 pcs. M6 x 35 mm / 6 pcs. M6 x 50 mm
Note: If you plan to use a main stand, we recommend using a sturdy main stand, as there is a stand stop only on the left side.
You can find compatible diaphragm mounting parts in the accessories section.
A quality product from the ADDY by Schöb Engineering brand, optimized by “der.pruefstand.”
Alternative to the original Puch part number: 349.3.10.332.0
| Manufacturer | ADDY |
| Material | Aluminum |
| Puch | E50 |
Accessories & related products
Stage6 R/T RT-PWK 28 mm carburetor "Black-Edition"
Nominal diameter: 28 mm · Color: black · Manufacturer: Stage6 R/T · Component group Carburetor: Carburetor complete · Surface: varnished · Carburetor type: RT-PWK · Mounting type: Flange · Mounting type: Plug connection · Area of application: Tuning · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread)
EUR 200.70
Stage6 R/T RT-PWK 24 mm carburetor Stage6 "Black-Edition"
Nominal diameter: 24 mm · Color: black · Manufacturer: Stage6 R/T · Component group Carburetor: Carburetor complete · Surface: varnished · Carburetor type: RT-PWK · Mounting type: Flange · Mounting type: Plug connection · Area of application: Tuning · Ø Air filter connection: 50 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread)
EUR 191.50
Not in stock
Malossi reed valve block MHR TEAM VL16
Total length: 66.2 mm · Manufacturer: Malossi · Material: Plastic · Number of flaps: 2 pcs · Membrane material: Carbon · Width: 48.3 mm · Hole spacing: 53 mm · Thick membrane platelets: 0.35 mm · Number of fixing points: 2 pcs · Ø mounting hole: 6.6 mm · Mounting type: Screws · Area of application: Racing · Camouflaged: No
EUR 105.40
Explore categories from Gearbox & housing (motor)
Moped fans also bought
Hot 
Mitas 2.25 x 17" tires MC11 Semi-Slick Whitewall
Inventory-managed: No · Manufacturer: Mitas · Tire width: 2.25 " · Tire width [mm]: 57.15 · Width: 2 1/4 " · Color: black · Color: white · Wheel size: 17 " · Old designation: 21 x 2.25 " · Speed index: J = 100 km/h · Load capacity index: 39 = 136 kg · Profile type: MC11 · Tire type: Semi-slick · White wall: Yes · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 74.50
MBR cover diaphragm inlet Gilardoni italkit | Puch
Total length: 72.5 mm · Manufacturer: MBR · Material: Steel · Surface: raw · Width: 48 mm · Number of fixing points: 4 pcs · Ø mounting hole: 6.3 mm · Mounting type: Screws · Thickness: 5 mm · Area of application: Tuning · Hole pattern [mm]: 60 x 35 mm
EUR 14.80
Working late? Evening hours on Thursday until 20:00
