Special, hand-made H100A+ racing exhaust system for your Puch moped / moped with E50 engine and exhaust outlet.
This racing exhaust is ideal for cross or racing use and, compared to the ADDY H100A, generates a strong power band, especially in the low to medium speed range, thanks to the extended midrange. The ideal exhaust timing for these racing engines is around 160 to 185 rpm.
Notes: We recommend using nuts with a key width of 8 or 9 mm for fastening to the outlet.
When used on a standard Puch Maxi frame, we recommend replacing the original fuel tap with an intermediate piece in conjunction with a 90° outgoing fuel tap.
Other complete racing systems as well as engine cases, cylinder kits and the aforementioned fuel outlet parts can be found in the accessories section.
Quality product from the ADDY by Schöb Engineering brand.
| Color | black |
| Total length | 870 mm |
| Manufacturer | ADDY |
| Material | Steel |
| Surface | varnished |
| Ø Silencer | 55 mm |
| Mounting type | Nuts & bolts, Stud bolts & nuts |
| Number of fixing points | 3 pcs |
| Exhaust type | Cone / double cone |
| Flame tube attachment | Flange |
| Puch | E50 |
Accessories & related products
swiing® revival special nut M6 SW8 (sprocket ref. back pedal / intake manifold)
Manufacturer: swiing® revival parts · Height: 6 mm · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Drive: External hexagon · Thread type: M6x1 (standard thread) · Width across flats: 8 mm · Nominal diameter (thread): 6 mm
EUR 3.30
Gilardoni italkit cylinder head 47 mm (75 ccm)
Manufacturer: Gilardoni italkit · Width: 155 mm · Height: 58 mm · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Ø cylinder: 47 mm · Total length: 155 mm · Ø screw holder: 6.5 mm · Number of fixing points: 4 pcs · Candle thread: long · Hole pattern [mm]: 44 x 44
EUR 79.10
Hot 
MLM exhaust "Crazy Pipe" black straight outlet | Puch
Manufacturer: MLM · Material: Steel · Color: black · Surface: varnished · Ø outside: 91 mm · Total length: 945 mm · Ø Silencer: 45 mm · Ø Internal connection: 22 mm · Exhaust type: Cone / double cone · Mounting type: Nuts & bolts · Number of fixing points: 3 pcs · Flame tube attachment: Stud bolts & nuts
EUR 435.90
ADDY exhaust H100A | Puch
Manufacturer: ADDY · Material: Steel · Color: black · Surface: varnished · Ø Silencer: 55 mm · Total length: 820 mm · Exhaust type: Cone / double cone · Mounting type: Nuts & bolts · Mounting type: Stud bolts & nuts · Number of fixing points: 3 pcs · Flame tube attachment: Flange
EUR 286.70
Explore categories from Exhaust system
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Ø outside: 8 mm · Total length: 15 mm · Ø Cable bushing: 2.3 mm · Screw head: Hexagon · Thread length: 7 mm · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Width across flats: 7 mm · Area of application: Standard
EUR 2.85
Dell'Orto 21 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Area of application: Tuning · Color: black · Total length: 82 mm · Carburetor type: PHBG AS · Width: 72 mm · Height: 125 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Plug connection clamped · Nominal diameter: 21 mm · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 38 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle block: 262AU · Nozzle size: 92 · Size of secondary nozzle: 50
EUR 137.60
Fuel tap vertical M12x1 (with union nut) outgoing right | Piaggio SI
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Plastic · Filter type: Plastic net · Installation direction: vertical / vertical · Thread type: MF12x1 (fine pitch thread) · Outlet direction: right · Spare tube shape: straight · Ø fuel hose connection: 6 mm · Reserve level: 65 mm · Mounting type: Union nut
EUR 14.30
swiing® revival nozzle set M5 (80 - 100) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Drive: Slot
EUR 24.00
Hot
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 11.40
Fortune / Merrick 2.50 - 2.75 x 17" inner tube
Manufacturer: Fortune · Tire width: 2.5 - 2.75 " · Tire width: 2.75 " · Tire width [mm]: 63.5 - 69.85 · Width: 2 1/2 " · Width: 2 3/4 " · Wheel size: 17 " · Tire height [%]: 100 · Old designation: 21 x 2.5 " · Old designation: 21 x 2.75 " · Valve type: TR4 Auto valve
EUR 13.70
Cable set E50 engine automatic black | Puch Maxi S / N
Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Total length: 1600 mm · Total length: 2200 mm · Color: black · Outer shell length: 6000 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears
EUR 22.40
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
