Carbon look air filter suitable for your Puch Maxi S / N moped / moped
.The air filter box is supplied assembled and is already equipped with several layers of fine metal sieves. The dust filter can be opened manually if required, for example to install an alternative air filter insert.
Notes:
From the factory, a joint with silicone sealant was created along the seam of original air filters after the two housing parts were joined to minimize the risk of air leakage. We recommend that this procedure is also used for this air filter.
The clamping bracket for the rear brake cable is larger than usual, which means that only Bowden cables with a diameter of 6 mm are held.
| Material | Plastic |
| Color | black |
| Ø Internal connection | 20 mm |
| Puch | E50 |
Accessories & related products
Clamp air filter 16 - 25 mm W2 Inox / galvanized | Puch E50
Manufacturer: Made in Europe · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: galvanized (blue) · Ø inside: 16 - 25 mm · Width: 9.3 mm · Number of components: 1 pcs · Pony OEM number: A3347
EUR 3.30
Elring Dirko HT sealing compound black (silicone) 70 ml permanently elastic up to 315°C
Temperature resistance (min.): -60 - 315 °C · Manufacturer: Elring · Material: Silicone · Color: black · Contents: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Area of application: Chemistry
EUR 22.80
Not in stock
EUR 325.71/l
Explore categories from Carburetor & intake system
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 14.30
Hot
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Color: silver · Number of teeth: 10 pcs · Total length: 175 mm · Ø outside sprocket: 36 mm · Thread type: M6x1 (standard thread) · Number of fixing points: 1 pcs
EUR 11.40
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Cable length: 2200 mm · Area of application: Standard
EUR 2.75
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.30
swiing® revival bottom bracket bushing nylon | Puch Maxi, X30 Sport, Velux, NG-2AH
Bearing type: Plain bearing · Ø outside: 20.2 mm · Manufacturer: swiing® revival parts · Material: Nylon · Ø inside: 16.2 mm · Total length: 19 mm · Ø Bundle: 24.1 mm · Color: black · Puch OEM number: 349.1.42.005.1
EUR 2.85
Inox
Hot
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Test mark: none · Surface: chrome-plated · Thread type: M8x1.25 (standard thread) · Color: Chrome · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Clamping diameter: 22 mm · Total length: 360 mm · Thread size: M8
EUR 32.00
Hot
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Thread type: M5x0.8 (standard thread) · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 14.80
Working late? Evening hours on Thursday until 20:00
