Ø 45 - 47 mm XL cylinder head in original look with enlarged cooling fins, suitable for your moped / moped with Sachs 502, 50/2, 50/3, 50/4 engine.
This tuning head was specially developed for the BAD ASS Diablo Ø 45 mm racing cylinder. Thanks to the larger cooling fin design, the cylinder head can optimally dissipate heat even at high temperatures and when driving slowly uphill.
The hole for the decompressor is prepared and provided with a thread (M10 x 1.5 mm). If this is installed, it only needs to be drilled through with a 3 mm drill bit.
| Manufacturer | BAD ASS |
| Material | Aluminum |
| Ø cylinder | 45 - 47 mm |
| Height | 61 mm |
| Ø screw holder | 19.3 mm |
| Area of application | Tuning, Racing |
| Ø outside | 108 mm, 85.5 mm |
| Number of fixing points | 4 pcs |
| Candle thread | short |
| Hole pattern [mm] | 47 x 47 |
| Decompressor | M10x1.5 |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) |
Accessories & related products
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Number of components: 12 pcs · Area of application: Standard · Material: Steel · Color: silver · Surface: galvanized (blue) · Drive: External hexagon · Screw head: Hexagon · Nominal diameter (thread): 6 mm · Total length: 34 mm · Shank: Yes · Width across flats: 10 mm · Thread length: 22 mm · Ø shaft: 5.85 mm · Thread type: M6x1 (standard thread) · Shank length: 8 mm · Strength class: 10.9
EUR 5.60
BAD ASS 45 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 45 mm · Manufacturer: BAD ASS · Material: Aluminum · Material: Gray cast iron · Area of application: Racing · Area of application: Tuning · Camouflaged: Yes · Displacement: 67 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 49.9 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Hole spacing inlet: 31 mm · Inlet window: 17.5 x 15.5 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Decompressor: No · Ø piston pin (B): 12 mm · Hole pattern [mm]: 60 x 40 / 51 x 40 / 47 x 47 · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread)
EUR 378.50
Explore categories from Cylinder
Moped fans also bought
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Stock number: E15 · Inner ring width: 8 mm · Manufacturer: NSK · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Area of application: Standard · Material: Brass · Material: Steel · Width: 8 mm · Ø inside: 15 mm · Ø outside: 35 mm · Ball bearing closed: No · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
EUR 28.60
swiing® revival exhaust nut M40x1.5 for 32 mm pipe, galvanized | Sachs
Height: 19 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 33.5 mm · Nut type: Union nut · Ø outside: 46 mm · Nominal diameter (thread): 40 mm · Thread type: MF40x1.5 (fine pitch thread)
EUR 16.00
BAD ASS 45 mm cylinder "Diablo" | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 45 mm · Manufacturer: BAD ASS · Material: Aluminum · Material: Gray cast iron · Area of application: Racing · Area of application: Tuning · Camouflaged: Yes · Displacement: 67 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 49.9 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 28 mm · Hole spacing inlet: 31 mm · Inlet window: 17.5 x 15.5 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Decompressor: No · Ø piston pin (B): 12 mm · Hole pattern [mm]: 60 x 40 / 51 x 40 / 47 x 47 · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread)
EUR 378.50
BAD ASS 45 mm cylinder "Diablo" incl. head | Sachs 502, 50/2, 50/3, 50/4
Nominal diameter: 45 mm · Manufacturer: BAD ASS · Material: Aluminum · Material: Gray cast iron · Displacement: 67 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 49.9 mm · Ø Outlet outside: 28 mm · Ø outlet inside: 28 mm · Inlet window: 17.5 x 15.5 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 60 x 40 / 51 x 40 / 47 x 47 · Decompressor: No · Camouflaged: Yes · Area of application: Racing · Area of application: Tuning
EUR 527.60
Working late? Evening hours on Thursday until 20:00
