
A supposed 19 mm Bing SRF replica carburetor.
The passage is slightly conical, so that the diameter is 19 mm on the outside, but only slightly larger than 17 mm in the middle.
The carburetor is not of the same quality as original Bing products, but is a good and inexpensive alternative.
Sink block is for nozzles with M4 thread.
ØAir filter screen: 60.2 mm
Connection diameter to intake manifold: 23 mm
Mounted nozzle size: unknown
| Component group Carburetor | Carburetor complete |
| Carburetor type | SRF |
| Mounting type | Plug connection clamped |
| Nominal diameter | 17 mm |
| Ø fuel hose connection | 6 mm |
| Nozzle thread | M4x0.7 (standard thread) |
| Ø Internal connection | 23 mm |
| Ø Inside entrance | 19 mm |
| Ø Output inside | 19 mm |
| Ø Air filter connection | 60.2 mm |
| Choke control | Hand choke |
| Area of application | Tuning |
| Puch |
| Zündapp Belmondo |
| Kreidler |
Moped fans also bought
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Manufacturer: GPO · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 70 mm
EUR 11.40
Bumm mirror round Inox
Manufacturer: Bumm · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Test mark: none · Color: Chrome · Surface: chrome-plated · Ø mirror surface: 107 mm · Ø mirror rod: 8 mm · Mirror rod length: 300 mm · Total length: 360 mm · Clamping diameter: 22 mm · Thread type: M8x1.25 (standard thread) · Thread size: M8
EUR 32.00
Clutch cable / brake cable Ø 1.5 mm x 225 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.5 mm · Nipple shape: Pears · Cable length: 2250 mm · Number of components: 1 pcs · Area of application: Standard · Piaggio OEM number: 270460
EUR 2.75
swiing® ingenious 16 mm intake manifold Bing SRF | Zündapp Belmondo (Type 247)
Material: Aluminum · Manufacturer: swiing® ingenious parts · Total length: 35 mm · Hole spacing inlet: 40 mm · Mounting type: Screws · Total height: 42 mm · Number of fixing points: 2 pcs · Ø inside: 16 mm · Ø External connection: 23 mm · Height flange center hole: 35 mm · Area of application: Tuning · Camouflaged: No
EUR 45.80






