Complete brake anchor plate from the manufacturer Grimeca, including brake pads, suitable for the front brake of Peugeot 103 SP and MVL rims.
With a little skill, the brake plate can also be adapted for Puch bikes. To do this, the collar of the anchor plate and the mounting of the locking cam of the fork must be milled off a little.
Ø outside brake shoes: 90 mm
Width brake shoes: 20 mm
Ø Bore for wheel axle: 12.2 mm
Ø outer brake plate: 110 mm
Height collar (from outer side of plate): 10 mm
Height mounting locking cam: 10 mm
Further accessories such as brake shoes or other brake anchor plates can be found in the accessories section.
| Material | Aluminum |
| Surface | sandblasted |
| Ø axle | 12 mm |
| Ø outside | 110 mm |
| Ø External brake pads | 90 mm |
| Ø bore | 12.2 mm |
| Puch |
| Peugeot |
Accessories & related products
Magura cable clamp Ø 8 x 15 mm
Material: Brass · Manufacturer: Magura · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Width across flats SW: 7 mm · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Ø outside: 8 mm · Screw head: Hexagon · Ø Bundle: 6 mm · Total length: 15 mm · Thread length: 7 mm · Area of application: Standard
EUR 2.85
swiing® ingenious wheel axle with bearing conversion kit spoke hub front Ø 29 mm | Puch
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Width: 2.7 mm · Width: 6.6 mm · Width: 11 mm · Width: 35.7 mm · Thread type: MF12x1 (fine pitch thread) · Total length: 165 mm · Ø inside: 12 mm · Ø outside: 29.02 mm · Thread length: 40.5 mm · Thread length: 50 mm · Height: 5.9 mm · Height: 9.9 mm · Ø shaft: 11.95 mm · Shank length: 74.5 mm · Ball bearing closed: Yes · Width across flats SW: 19 mm
EUR 44.50
Moped fans also bought
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 " · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Valve type: TR4 Auto valve
EUR 11.30
Side stand black | Puch Maxi S, N, P1 / Supermaxi LG1, LG2 / X30 NS, NL, NG, N-2AH
Manufacturer: Made in Portugal · Material: Steel · Surface: powder-coated · Color: black · Adjustable: Yes · Length pivot point - floor: 220 mm · Mounting type: Screwed clamp · Number of fixing points: 2 pcs · Total length: 340 mm
EUR 22.70
Not in stock
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Material: Brass · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Quantity: 10 pcs · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Total length: 8 mm
EUR 23.90
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Thickness: 0.35 mm · Ø inside: 106 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Number of fixing points: 4 pcs · Puch OEM number: 349.1.10.349.1
EUR 2.75
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX, C24. Bravo, SUPERbravo
Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Total length: 46 mm · Color: black · Nominal diameter: 13 mm · Mounting type: Plug connection clamped · Ø Internal connection: 16 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 66 · Width: 60 mm · Height: 96 mm · Area of application: Tuning
EUR 68.50
Collection only possible with online purchase and appointment.
