Lightened clutch basket with 21 teeth suitable for Puch Maxi mopeds with 1-speed e50 engine.
Special design with needle bearing. This clutch basket was developed for heavily souped-up engines where the brass bushing bearing reaches its limits.
Advantages of the needle bearing:
- Higher speeds possible
- Smooth, even running
- Optimal lubrication
- Better heat dissipation
Optimal adjustment of the clutch basket clearance is essential. Inadequate adjustment can destroy the bearing in a very short time.
Note the corresponding dimensions in Figure 3.
You will find suitable thrust washers in the accessories, which are fitted in front of and behind the clutch basket.
| Material | Steel |
| Number of teeth | 21 pcs |
| Color | graphite colors |
| Recording type | Interlocking |
| Toothing type | helical toothed |
| Ø outside | 99.6 mm |
| Ø inside | 15 mm |
| Ø Receptacle | 30.5 mm |
| Height | 49.5 mm |
| Area of application | Tuning |
| Puch | E50 |
Accessories & related products
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Ø outside: 93 mm · Ø inside: 12 mm · Ø inside: 14.6 mm · Number of jaws: 3 pcs · Thickness: 20.9 mm · Number of springs: 3 pcs · Area of application: Original · Area of application: Standard
EUR 57.00
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing inlet: 32 - 38 mm · Area of application: Standard
EUR 11.30
swiing® revival stud bolt set M6 x 106 mm | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Diameter: 5.9 mm · Drive: External hexagon · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats SW: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.45
swiing® revival screw set engine galvanized | Puch Maxi
Drive: Cross recess · Drive: Hexagon socket · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 11.30
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Number of fixing points: 4 pcs · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 0.5 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.30
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Material: Steel · Surface: hardened & ground · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm · Manufacturer: swiing® revival parts · Ø outside: 22 mm · Ø outside: 24 mm · Ø inside: 15 mm · Ø inside: 17 mm · Area of application: Standard
EUR 44.50
Not in stock
Collection only possible with online purchase and appointment.
