Black anodized aluminium gearbox cover, suitable for your Puch moped / moped with E50 engine.
The gearbox cover is equipped with cooling fins to ensure optimum heat dissipation. The increased position of the oil filler hole makes it possible to fill 1.5 dl more oil, which further improves the cooling capacity.
The lid and the filler screw are included in the scope of delivery.
Note: The clutch cover fits both the standard clutch and the Tripple Clutch Racing clutch.
Other matching parts such as the complete Tripple-Clutch racing clutch can be found in the accessories section.
| Manufacturer | Made in Switzerland |
| Material | Aluminum |
| Surface | anodized |
| Ø outside | 116 mm |
| Total length | 116 mm |
| Ø inside | 107 mm, 30 mm |
| Width | 116 mm |
| Height | 38.5 mm |
| Number of fixing points | 4 pcs |
| Color | black |
| Puch | E50 |
Ratings
Accessories & related products
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Thickness: 0.35 mm · Number of components: 1 pcs · Puch OEM number: 349.1.10.349.1
EUR 2.70
Explore categories from Gearbox & housing (motor)
Moped fans also bought
Starter cable Ø 1.5 mm x 160 cm | Puch Maxi
Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø nipple: 8 mm · Nipple length: 12 mm · Area of application: Standard · Ø Stranded wire: 1.5 mm · Cable length: 1600 mm · Nipple shape: Barrel (transverse) · Number of components: 1 pcs
EUR 2.70
Oil seal NBR 17/40/7 A DUO | Puch E50
Material: NBR · Manufacturer: Puch · Surface: rubberized · Shaft seal type: A DUO - With rubberized outer casing / two sealing lips. · Area of application: Standard · Ø outside: 40 mm · Ø inside: 17 mm · Width: 7 mm · Temperature resistance (min.): -30 - 100 °C
EUR 5.70
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm
EUR 21.10
swiing® revival gearbox cover gasket 0.3 mm engine | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø outside: 116 mm · Ø inside: 106 mm · Number of fixing points: 4 pcs · Thickness: 0.35 mm · Number of components: 1 pcs · Puch OEM number: 349.1.10.349.1
EUR 2.70
swiing® ingenious crankshaft "High End" C3/4 & FPM (+1 mm stroke) | Puch E50
Material: Steel · Manufacturer: swiing® ingenious parts · Cheek type: Full cheeks · Area of application: High End · Crankshaft stroke: 44 mm · Connecting rod length center-center: 90 mm · Number of gears: 1 pcs · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Thread type: MF10x1 (fine pitch thread) · Ø crank webs: 69.9 mm · Ø Connecting rod eye: 15 mm · Weight: 970 g · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Thread length: 11 mm · Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Thread length: 15 mm · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm
EUR 256.30
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Color: Chrome · Color: black-matt · Surface: chrome-plated · Surface: raw · Ignition system: MVT Allumage · Width: 150 mm · Height: 82 mm · Total length: 170 mm · Number of fixing points: 2 pcs · Ø outside: 130 mm · Hole spacing: 138 mm
EUR 167.10
Collection only possible with online purchase and appointment.
