Rubber sleeve for pipe bend and adjusting screw for various Dell'Orto SHA and PHBG carburetors, which are fitted to Piaggio Ciao, Si, Bravo, Boxer, Pony Cross 521, Cilo Cross 521, Pony GTX 521, etc., among others. Mopeds / mopeds are installed.
Length: 30 mm
Ø inside bottom: 7 mm
Ø inside top: 4 mm
The seal protects against false air and unwanted water ingress.
Quality product from the Italian manufacturer Dell'Orto.
Details
| Manufacturer | Dell'Orto |
| Material | Rubber |
| Color | black |
| Ø inside | 7 mm |
| Total length | 30 mm |
| Ø inside 2 | 4 mm |
Suitable for the following models
| Universal | |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT), 2A (HG) 508 - 1 A 535 |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
| Zündapp Belmondo | |
| Tomos |
Accessories & related products
BING rubber grommet Ø 8 mm carburetor pipe bend
Ø inside: 8 mm · Manufacturer: BING · Material: Rubber · Color: black · Total length: 29 mm · Clamping diameter: 4 mm · Ø outside: 12 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
EUR 4.45
GPO 85° carburetor pipe bend brass M6x0.75
Manufacturer: GPO · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Thread type: MF6x0.75 (fine pitch thread) · Total length: 45.5 mm · Total length: 53.5 mm · Height: 30 mm · Internal thread: MF6x0.75 (fine pitch thread) · Angle: 85 ° · Ø outside: 6 mm · Pony OEM number: A2066 · Sachs OEM no.: 0261 132 000
EUR 6.75
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 80 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Height: 35 mm · Total length: 41.5 mm · Total length: 50 mm · Internal thread: MF5x0.75 (fine pitch thread)
EUR 7.90
Dell'Orto 30° carburetor elbow set M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 30 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Height: 13 mm · Total length: 43 mm · Total length: 50 mm · Internal thread: MF5x0.75 (fine pitch thread)
EUR 13.60
Dell'Orto 90° carburetor elbow set M6x0.75 (long thread)
Manufacturer: Dell'Orto · Width across flats nut: 7 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 90 ° · Thread type: MF5x0.75 (fine pitch thread) · Ø outside: 6 mm · Height: 31 mm · Total length: 39 mm · Total length: 49 mm · Internal thread: MF5x0.75 (fine pitch thread)
EUR 13.60
Dell'Orto 45° carburetor pipe bend M6x0.75
Manufacturer: Dell'Orto · Width across flats nut: 8 mm · Material: Brass · Component group Carburetor: Adjusting screws, float, etc. · Surface: nickel-plated · Thread type: MF6x0.75 (fine pitch thread) · Total length: 34.5 mm · Total length: 42 mm · Height: 56 mm · Height: 61 mm · Internal thread: MF5x0.75 (fine pitch thread) · Angle: 45 ° · Ø outside: 6 mm
EUR 7.90
Moped fans like you also bought:
Magura cable clamp Ø 8 x 15 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Drive: External hexagon · Drive: Slot · Thread type: M6x1 (standard thread) · Ø Cable bushing: 2.3 mm · Ø Bundle: 6 mm · Thread length: 7 mm · Total length: 15 mm · Screw head: Hexagon · Width across flats SW: 7 mm · Ø outside: 8 mm · Area of application: Standard
EUR 2.85
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Area of application: Standard
EUR 3.20
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Drive: Slot · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Thread length: 4 mm · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm
EUR 2.30
BING rubber grommet Ø 8 mm carburetor pipe bend
Ø inside: 8 mm · Manufacturer: BING · Material: Rubber · Color: black · Total length: 29 mm · Clamping diameter: 4 mm · Ø outside: 12 mm · Alternative version of the Pony OEM number: A1930 · Pony OEM number: A1952 · Alternative version of the Sachs OEM number: 0260 024 001 · Sachs OEM no.: 0260 125 000
EUR 4.45
Magura adjusting screw brake short
Manufacturer: Magura · Material: Brass · Surface: nickel-plated · Color: silver · Ø shaft: 6.1 mm · Drive: Knurled screw · Shank length: 6.9 mm · Thread type: MF6x0.75 (fine pitch thread) · Thread length: 15 mm · Total length: 31 mm · Total length: 40 mm · Ø External head: 9.15 mm
EUR 3.90
swiing® revival 80° carburetor pipe bend M6x0.75
Manufacturer: BING · Manufacturer: swiing® revival parts · Width across flats nut: 7 mm · Width across flats nut: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Material: Brass · Surface: nickel-plated · Angle: 80 ° · Thread type: MF6x0.75 (fine pitch thread) · Ø outside: 6 mm · Height: 35 mm · Total length: 41.5 mm · Total length: 50 mm · Internal thread: MF5x0.75 (fine pitch thread)
EUR 7.90
Collection only possible with online purchase and appointment.
