Disc brake system manufactured in small series incl. powder-coated 16” front wheel and CNC-milled brake caliper plate for your Piaggio Bravo 2 moped / moped.
The aluminum milled base plate is mounted to the mounting points of the mudguard using the two screws supplied. The existing cam on the fork gives the bracket additional guidance and ensures stability. All relevant bolts are either fitted with lock nuts or already secured with medium-strength Loctite.
Contents of the disc brake set:
- 16” 4-star cast rim at the front incl. adapter ring for centring the brake disc and cover instead of the brake anchor plate
- Brake disk 220 mm
- Enclosed wheel bearing and quick-release axle
- Brake calliper
- Brake cable 900 mm (length sufficient for original handlebars)
- Brake lever with container for the brake fluid
- Bolts and nuts for fastening all parts
Installation instructions:
After fitting a tire, routing the cable and installing the new grip unit, the brake fluid reservoir must be filled and the system bled.
If you want to continue using the mudguard, the brake calliper plate still needs to be adjusted.
If you want to continue using the speedometer, the speedometer drive must be drilled out and the spacer must be unscrewed.
Use only fresh DOT4 brake fluid and bleed the system properly to ensure your safety.
Pay attention to cleanliness during installation and clean the brake disk and brake shoes with brake cleaner before use.
| Ø outside | 220 mm |
| Manufacturer | Made in Italy |
| Material | Aluminum, Steel |
| Surface | powder-coated |
| Color | black |
| Cable length | 900 mm |
| Piaggio | Bravo / Super Bravo |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.10
EUR 2’510.00/l
Continental 2.00 - 2.50 x 16" tube
Manufacturer: Continental · Tire width: 2 - 2.5 " · Tire width: 2.25 - 2.5 " · Tire width: 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width: 2 " · Width: 2 1/4 " · Width: 2 1/2 " · Tire height [%]: 100 · Wheel size: 16 " · Old designation: 20 x 2 " · Old designation: 20 x 2.25 " · Old designation: 20 x 2.5 " · Valve type: TR6 car valve
EUR 16.60
Heidenau 2.25 x 16" tires M4 Allround
Inventory-managed: No · Manufacturer: Heidenau · Tire width: 2.25 " · Width: 2 1/4 " · Color: black · Old designation: 20 x 2.25 " · Speed index: J = 100 km/h · Load capacity index: 38 = 132 kg · Profile type: M4 · Tire type: Allround · White wall: No · Wheel size: 16 " · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 49.20
Continental 2.25 x 16" Go tires Semi-Slick
Inventory-managed: No · Manufacturer: Continental · Tire width: 2.25 " · Tire width [mm]: 57.15 · Color: black · Width: 2 1/4 " · Wheel size: 16 " · Old designation: 20 x 2.25 " · Speed index: J = 100 km/h · Load capacity index: 38 = 132 kg · Profile type: ContiGo! · Tire type: Semi-slick · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 59.50
Brake line 0.9 - 1.9 m (selection) black 28 / 90° incl. banjo bolts
Thread type: MF10x1.25 (fine pitch thread) · Material: Rubber · Material: Steel · Color: black · Mounting type: Screws · Cable length: 900 mm · Cable length: 1000 mm · Cable length: 1150 mm · Cable length: 1400 mm · Cable length: 1600 mm · Cable length: 1700 mm · Cable length: 1900 mm
EUR 27.40
Explore categories from Disc brake
Moped fans also bought
Hot 
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Total length: 6 mm · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 18.20
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Height: 95 mm · Manufacturer: swiing® ingenious parts · Total length: 66 mm · Width: 50 mm · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 91.70
Chrome tank luggage carrier | Puch Maxi S
Height: 440 mm · Manufacturer: Made in Portugal · Total length: 430 mm · Width: 180 mm · Ø mounting hole: 8.1 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Nuts & bolts · Number of fixing points: 4 pcs · Puch OEM number: 349.1.29.627.1
EUR 149.00
swiing® ingenious intake manifold 16 mm | Puch X30 NS, NL, Sprinter
Ø inside: 16 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Total length: 48 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Total height: 70 mm
EUR 57.30
GPO 38 mm cylinder head Racing high-compression | Puch Maxi S, N / X30 NS, NL, N-2AH
Total length: 135 mm · Height: 55 mm · Manufacturer: GPO · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Ø cylinder: 38 mm · Width: 125 mm · Ø screw holder: 7.4 mm · Hole pattern [mm]: 45 x 45 · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No
EUR 57.30
Working late? Evening hours on Thursday until 20:00
