Nice disc brake system for your Puch moped / moped with 5-star cast rim and EBR telescopic fork with mount for a brake caliper.
The disc brake system is factory-filled with brake fluid.
The disc brake system is filled with brake fluid ex works and is supplied ready for installation with all necessary components.
Scope of delivery:
- Brake disc Ø 240 mm
- Hub with ball bearings already installed
- Brake caliper
- 850 mm long steel flex hose
- Brake lever
- Mounting plate for attaching the brake calliper
- 12 mm wheel axle with all nuts and washers
- Bolts for mounting the hub to the rim
Notes: Mounting on the original fork is not possible. An EBR fork with the option of attaching a brake calliper is required (see accessories).
The hub fits in original Grimeca as well as in the reproduction rims in the accessories.
The disc brake kit works, but will not knock anyone off their saddle in terms of quality. You can find the high-quality alternative in the accessories section.
| Ø outside | 240 mm |
| Manufacturer | Quenching |
| Ø Handlebars | 22 mm |
| Cable length | 850 mm |
| Puch |
Accessories & related products
Brake line 0.9 - 1.9 m (selection) black 28 / 90° incl. banjo bolts
Thread type: MF10x1.25 (fine pitch thread) · Material: Rubber · Material: Steel · Color: black · Mounting type: Screws · Cable length: 900 mm · Cable length: 1000 mm · Cable length: 1150 mm · Cable length: 1400 mm · Cable length: 1600 mm · Cable length: 1700 mm · Cable length: 1900 mm
EUR 27.30
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Ø inside: 25.5 mm · Ø outside: 30 mm · Length spring hook: 50 mm · Leg length: 45 mm · Ø wire: 2.4 mm · Area of application: Original · Material: Spring steel · Area of application: Standard · Surface: galvanized (blue) · Total length: 125 mm
EUR 5.60
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: blue · Number of components: 3 pcs · Total length: 28 mm
EUR 20.50
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Thread type: MF12x1 (fine pitch thread) · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Mounting type: Union nut · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.30
GPO tail light ULO | Puch Maxi N, S old version
Width: 60 mm · Height: 110 mm · Manufacturer: GPO · Material: Plastic · Color: black · Color: red · Ø Receptacle: 4 mm · Bulb holder: BA15s · Mounting type: Nuts & bolts · Test mark: none · Tension: 6 V · Number of fixing points: 2 pcs · Brake light: No · Reflectors: Yes · Battery operated: No · Depth: 80 mm
EUR 41.70
GPO sprocket 40 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø inside: 94 mm · Manufacturer: GPO · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 40 pcs · Number of fixing points: 6 pcs · Ø mounting hole: 6.7 mm · Hole spacing: 36.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø bolt circle: 106 mm
EUR 22.70
Collection only possible with online purchase and appointment.
