Disc brake system suitable for the rear 5-star cast rim of your Puch moped / moped.
The brake disk mount is compatible with both original Grimeca rims and their replicas. For installation, the rear wheel rim is placed between the adapter piece for the brake disk and the wheel hub and clamped using the enclosed screws in a sandwich principle.
The disc brake system is supplied ready for installation with the following components:
| Ø Handlebars | 22 mm |
| Ø outside | 185 mm |
| Cable length | 1750 mm |
| Puch |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Temperature resistance (min.): -75 - 200 °C · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Area of application: Chemistry · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 24.40
EUR 2’440.00/l
Explore categories from Disc brake
Moped fans also bought
Magura cable clamp Ø 8 x 15 mm
Material: Brass · Manufacturer: Magura · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Ø outside: 8 mm · Total length: 15 mm · Thread type: M6x1 (standard thread) · Thread length: 7 mm · Ø Bundle: 6 mm · Area of application: Standard · Ø Cable bushing: 2.3 mm · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats: 7 mm
EUR 2.80
EUR 2.45
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning · Color: blue
EUR 20.00
swiing® revival oil filler plug with sealing ring | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 14.6 mm · Screw head: Lens head · Ø External head: 14 mm · Drive: Slot · Thread type: M10x1.5 (standard thread) · Number of components: 2 pcs · Thread length: 6 mm · Puch OEM number: 364.1.10.660.1
EUR 3.90
GPO sprocket 35 - 57 teeth black | Puch Maxi S, N / X30 NG-2AH
Manufacturer: GPO · Material: Steel · Surface: varnished · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Number of teeth: 35 pcs · Number of teeth: 36 pcs · Number of teeth: 37 pcs · Number of teeth: 38 pcs · Number of teeth: 39 pcs · Number of teeth: 40 pcs · Number of teeth: 41 pcs · Number of teeth: 42 pcs · Number of teeth: 43 pcs · Number of teeth: 44 pcs · Number of teeth: 45 pcs · Number of teeth: 46 pcs · Number of teeth: 47 pcs · Number of teeth: 48 pcs · Number of teeth: 49 pcs · Number of teeth: 50 pcs · Number of teeth: 51 pcs · Number of teeth: 52 pcs · Number of teeth: 53 pcs · Number of teeth: 54 pcs · Number of teeth: 55 pcs · Number of teeth: 56 pcs · Number of teeth: 57 pcs · Ø bolt circle: 106 mm · Ø inside: 94 mm · Ø mounting hole: 6.7 mm · Cranking (offset): 8 mm · Color: black
EUR 22.20
Collection only possible with online purchase and appointment.
