Hot 
Tuning clutch suitable for Puch Maxi S and N, as well as Puch Supermaxi LG1 mopeds equipped with an E50 engine. The clutch is designed for racing kits up to 65 ccm.
The racing clutch is equipped with a reinforcement plate that ensures the necessary stability even at high RPMs.
The package includes four different spring strengths for the respective applications:
- Red (pre-installed springs with thin wire): correspond to the original clutch springs.
- Blue: Stronger spring, for lightly tuned engines.
- Yellow: Stronger spring, for moderately tuned engines.
- Red: Strongest spring, for high-end tuning.
Before installing the centrifugal clutch, make sure that the openings of the retaining rings, also known as BZ rings, face outward. This prevents the BZ rings from coming loose during operation.
Note:
We recommend not using the yellow and red springs (high-end), as the high RPM during engagement causes increased friction. This leads to high temperatures and can ultimately result in the clutch being destroyed due to overheating. For better results, we recommend using swiing® springs or even switching to an aramid clutch.
You can find the springs and aramid clutch mentioned above, as well as everything you need for your clutch overhaul, in the accessories section.
Brand-name product from the manufacturer DMP.
| Manufacturer | DMP |
| Material | Steel |
| Material addition | Chrome steel (colloquially known as stainless steel) |
| Number of springs | 3 pcs |
| Thickness | 22 mm |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Ø outside | 94 mm |
| Area of application | Performance, Racing, High End, Tuning |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Surface: coated · Color: blue · Material: Spring steel · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Number of components: 3 pcs · Area of application: Tuning
EUR 20.50
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 0.5 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.30
ASP clutch 2-jaw "sheet" Aramid | Puch E50
Manufacturer: ASP · Material addition: Aramid (colloquially known as Kevlar) · Material: Steel · Number of jaws: 2 pcs · Number of springs: 4 pcs · Thickness: 21.5 mm · Ø outside: 91.5 mm · Area of application: Racing · Area of application: Tuning · Alternative version of the Puch OEM number: VM 477.0 · Alternative version of the Puch OEM number: 349.1.12.004.0
EUR 194.90
ASP clutch 3-jaw "woven" Aramid | Puch E50
Manufacturer: ASP · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 6 pcs · Ø outside: 91.5 mm · Thickness: 21.5 mm · Area of application: Racing · Area of application: Tuning
EUR 275.20
Explore categories from Clutch
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Number of components: 7 pcs · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Hole spacing outlet: 42 mm · Area of application: Standard · Decompressor: Yes
EUR 11.40
EUR 10.20
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Surface: galvanized (blue) · Diameter: 5.9 mm · Material: Steel · Nominal diameter (thread): 6 mm · Drive: External hexagon · Total length: 106 mm · Thread type: M6x1 (standard thread) · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.50
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Thickness: 0.5 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.30
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Color: sand-colored · Material: Sealing paper · Ø inside: 106 mm · Thickness: 1 mm · Ø outside: 116 mm · Number of components: 1 pcs · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.50
Hot
swiing® ingenious crankshaft "High End" with mounted bearings | Puch E50
Dimension needle bearing: 12 / 15 x 14.2 mm (axe 12) · Manufacturer: swiing® ingenious parts · Cheek type: Full cheeks · Material: Aluminum · Material: Steel · Crankshaft stroke: 43 mm · Connecting rod length center-center: 90 mm · Weight: 968 g · Total length of crankpin on clutch side: 74 mm · Total length crankpin ignition side: 66 mm · Ø crank webs: 69.9 mm · Thread type: MF10x1 (fine pitch thread) · Ø Connecting rod eye: 15 mm · Thread length: 11 mm · Ø piston pin (B): 12 mm · Thread length: 15 mm · Ø Bearing seat (clutch side): 17 mm · Ø Bearing seat (ignition side): 17 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Wide crank webs: 34 mm · Length 1st paragraph: 9 mm · Length 2nd paragraph: 14.5 mm · Length 3rd paragraph: 25 mm · Ø 1st step (on the coupling side): 22 mm · Ø 2nd shoulder (on the clutch side): 17 mm · Ø 3rd step (on the clutch side): 15 mm · Length of shoulder (ignition side): 26.3 mm · Number of gears: 1 pcs
EUR 212.10
Not in stock
Working late? Evening hours on Thursday until 20:00
