Hot 
Adjustable gas-pressure shock absorbers in black/gold with an adjustable coil spring for your moped, scooter, and small motorcycle.
The coil dampers offer versatile adjustment options, allowing you to optimize them for your desired riding characteristics. The stiffness or preload of the springs can be continuously adjusted up to 45 mm via a threaded mechanism.
Length (mounting point to mounting point): 320 mm
Note: The rear springs should always be secured with large U-washers to prevent the bearing sleeves from shifting when lateral forces occur.
Price per pair.
Simpler rear springs, as well as shock absorbers for motocross and mounting hardware, can be found in the accessories section.
Brand-name product from the manufacturer DMP.
| Ø outside | 59 mm |
| Manufacturer | DMP |
| Material | Steel, Aluminum |
| Surface | varnished, anodized |
| Color | black, gold |
| Damping type | Spring, Pneumatic (air) |
| Adjustable | Yes |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts & bolts |
| Total length | 360 mm |
| Hole spacing | 360 mm |
| Ø Fastening inside | 10 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Area of application: Chemistry · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.10
EUR 2’510.00/l
YSS shock absorber Racing 35 cm (oil pressure)
Manufacturer: YSS · Hole spacing: 350 mm · Material: Steel · Color: black · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Total length: 380 mm · Mounting type: Nuts & bolts
EUR 149.00
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Manufacturer: swiing® revival parts · Number of components: 17 pcs · Screw head: Hexagon · Nominal diameter (thread): 8 mm · Thread type: M8x1.25 (standard thread)
EUR 13.70
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
EUR 20.50
Shock absorber 34 cm fancy neon yellow
Ø outside: 50 mm · Hole spacing: 340 mm · Color: black · Color: neon yellow · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø spars: 30 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Total length: 375 mm · Mounting type: Nuts & bolts
EUR 91.70
EUR 74.50
MKX shock absorber 34 cm black
Ø outside: 46 mm · Manufacturer: MKX · Hole spacing: 340 mm · Color: black · Surface: varnished · Damping type: Spring · Adjustable: Yes · Ø spars: 24 mm · Number of fixing points: 2 pcs · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Total length: 375 mm · Mounting type: Nuts & bolts
EUR 57.30
Hot
YSS shock absorber High End 33 - 34 cm black / red (gas pressure)
Ø outside: 61 mm · Manufacturer: YSS · Hole spacing: 330 mm · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Surface: anodized · Color: black · Color: red · Damping type: Pneumatic (air) · Adjustable: Yes · Number of fixing points: 2 pcs · Ø Fastening inside: 10 mm · Total length: 340 mm · Total length: 370 mm · Mounting type: Nuts & bolts
EUR 521.90
Explore categories from Shock absorber & swingarm
Moped fans also bought
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Ø Pin: 4 mm · Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Rolling circumference: 1448 mm · Color: gray · Ø bore: 4.05 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock
EUR 21.70
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Height: 8 mm · Drive: External hexagon · Nominal diameter (thread): 10 mm · Thread type: MF10x1 (fine pitch thread) · Width across flats: 17 mm
EUR 4.50
Working late? Evening hours on Thursday until 20:00
