44 mm diameter racing cylinder kit, compatible with Tomos Sprint, Quadro, FunSport, and Classic mopeds equipped with an A35 engine.
This reliable everyday cylinder impresses with its suitability for daily use, though it doesn’t compete at the top level.
To get the full performance out of the 65 cc tuned cylinder, we recommend installing a racing exhaust and a matching carburetor.
The package includes the gray cast iron cylinder and the complete piston. The gaskets for the racing cylinder are not included.
Note: We recommend that you check the edges inside the cylinder and lightly deburr them if necessary, as they may occasionally be slightly sharp. Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find alternative racing cylinders and the matching gasket set in the accessories section.
Brand-name product from the manufacturer FAST ARROW.
| Material | Gray cast iron |
| Nominal diameter | 44 mm |
| Manufacturer | FAST ARROW |
| Surface | varnished |
| Displacement | 65 ccm |
| Ø cylinder neck | 47.9 mm |
| Ø outlet inside | 22.6 mm |
| Inlet window | 36.5 x 29.5 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Hole spacing inlet | 39 mm, 32 mm |
| Ø piston pin (B) | 12 mm |
| Outlet type | slanted |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 44 x 44 |
| Area of application | Tuning |
| Tomos | Classic Quadro Sprint Fun Sport'R Roadie A35 |
Accessories & related products
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 30 mm · Thread type: M6x1 (standard thread) · Diameter: 5.95 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9 · Thread length: 12 mm
EUR 2.05
Dell'Orto 15/15 SHA carburetor hand choke (with air filter)
Width: 70 mm · Height: 100 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: SHA · Nominal diameter: 15 mm · Ø without reducing sleeve: 21 mm · Ø Inside entrance: 15 mm · Area of application: Racing · Area of application: Tuning · Ø Output inside: 15 mm · Ø Air filter connection: 59 mm · Ø Internal connection: 18 mm · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Total length: 82 mm · Mixed oil connection: No · Vacuum connection: No · Mounting type: Plug connection clamped · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 68
EUR 80.20
Not in stock
GPO gasket set 45 mm cylinder & diaphragm | Tomos A3, A35
Manufacturer: GPO · Material: Aluminum · Material: Composite materials · Material: Oiled paper · Ø cylinder: 45 mm · Area of application: Tuning · Hole spacing outlet: 42 mm · Number of components: 5 pcs · Hole pattern [mm]: 44 x 44 mm / 39 x 36/32 mm · Decompressor: Yes
EUR 11.40
Not in stock
swiing® revival nozzle set M5 (60 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Quantity: 11 pcs · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 66 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70
EUR 26.30
Not in stock
swiing® revival nozzle set M5 (70 - 80) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Quantity: 11 pcs · Component group Carburetor: Spraying · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80
EUR 26.30
Explore categories from Cylinder
Moped fans also bought
Hot
KMC drive chain 415H (reinforced) 128L
Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Number of chain links: 128 pcs · Chain type: 415H · Chain lock type: Spring lock · Chain pitch: 1/2" x 3/16" · Rolling circumference: 1626 mm · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 14.30
Hot
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 30 mm · Thread type: M6x1 (standard thread) · Diameter: 5.95 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9 · Thread length: 12 mm
EUR 2.05
swiing® revival nozzle set M5 (70 - 92) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Total length: 8 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Nozzle size: 92
EUR 24.00
Working late? Evening hours on Thursday until 20:00
