75 cc racing cylinder kit for fan-cooled engines in your moped.
The Gilardoni Italkit racing cylinder with a 47 mm bore has been machined for use with forced-air cooling. However, this required significant modifications. Only the bare essentials of its cooling fins remain.
The cooling capacity has been reduced to a minimum as a result of this modification and therefore requires someone who knows exactly what they’re doing.
In short: an exceptional racing kit for experienced mechanics who prefer to push the limits rather than settle for ordinary solutions.
The aluminum cylinder features a running surface coated with nickel-silicon carbide (commonly known as Nikasil).
Notes:
This cylinder kit is intended exclusively for experienced mechanics, as cooling capacity has been reduced to a minimum due to the machining process.
Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust port on the exhaust side.
You can find additional components for your build—such as diaphragms, intake manifolds, piston rings, and gaskets—in the accessories section.
A quality product from the Italian manufacturer Gilardoni under the italkit brand.
| Nominal diameter | 47 mm |
| Manufacturer | Gilardoni italkit |
| Material | Aluminum |
| Displacement | 75 ccm |
| Ø cylinder neck | 51.2 mm |
| Ø Outlet outside | 26.5 mm |
| Inlet window | 39.3 x 46.4 |
| Ø piston pin (B) | 12 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 34.5 mm, 59.8 mm |
| Outlet type | slanted |
| Hole spacing outlet | 41.6 mm |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 44 x 44 |
| Decompressor | No |
| Camouflaged | No |
| Area of application | Tuning, Racing |
| Universal | |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
Malossi 4-folding diaphragm insert Carbon Gilardoni italkit | Puch
Manufacturer: Malossi · Material: Plastic · Area of application: Tuning · Number of flaps: 4 pcs · Membrane material: Carbon · Number of fixing points: 4 pcs · Hole pattern [mm]: 61 x 39 mm / 58 x 35 mm · Mounting type: Screws
EUR 59.50
swiing® ingenious intake manifold Gilardoni italkit Inox
Ø inside: 21 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: No · Area of application: Tuning · Ø External connection: 24 mm · Total height: 55 mm · Hole pattern [mm]: 60 x 35 · Height flange center hole: 42.5 mm · Mounting type: Screws · Total length: 80 mm · Number of fixing points: 4 pcs
EUR 77.90
Stage6 8-folding diaphragm by Moto Tassinari (Gilardoni italkit)
Manufacturer: Stage6 · Material: Plastic · Surface: raw · Number of flaps: 8 pcs · Width: 49 mm · Membrane material: Carbon · Thick membrane platelets: 0.3 mm · Total length: 77 mm · Mounting type: Screws · Hole pattern [mm]: 60 x 34.8 mm · Area of application: High End · Number of fixing points: 4 pcs · Ø mounting hole: 6.6 mm
EUR 131.80
Not in stock
GPO Special Cylinder Stud Bolt Set M6x106, Galvanized | Puch
Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Diameter: 7 mm · Drive: External hexagon · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Total length: 106 mm · Width across flats: 10 mm · Strength class: 10 · Strength class: 10.9 · Thread length: 15 mm · Thread length: 19 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 22.80
Explore categories from Cylinder
Working late? Evening hours on Thursday until 20:00
