Black pair of handlebar grips with yellow flame decor.
One set consists of one grip cover with an inner diameter of 22 or 24 mm.
For a manual moped, moped or small motorcycle that requires two grip covers with an inner diameter of 24 mm, you must therefore order two grip sets. The grip ends are closed, but can be opened individually if required (e.g. for mounting a side mirror).
Total length of rubber grip: 125 mm
To make mounting easier, we recommend heating the rubber grip slightly or spraying it with hairspray on the inside.
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Rubber |
| Ø inside | 22 mm, 24 mm |
| Ø outside | 50 mm |
| Total length | 125 mm |
| Color | yellow, black |
Ratings
Accessories & related products
Handlebar fork plate 40 cm curved with chrome strut
Manufacturer: Made in Germany · Material: Steel · Surface: chrome-plated · Color: Chrome · Width: 730 mm · Fork plate holder length: 100 mm · Height: 400 mm · Ø outside: 22 mm · Length handlebar ends: 150 mm · Clamping diameter: 22 mm · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 320 mm · Mounting type: Fork plate
EUR 41.10
Handlebar fork plate 15 cm cross chrome
Ø outside: 22 mm · Height: 150 mm · Width: 710 mm · Material: Steel · Surface: chrome-plated · Color: Chrome · Mounting type: Fork plate · Clamping diameter: 22 mm · Fork plate holder length: 110 mm · Length handlebar ends: 155 mm · Crossbar: Yes · Ø Strut: 12 mm · Strut length: 220 mm
EUR 28.50
GPO light switch with wiring harness base chrome version
Manufacturer: GPO · Material: Plastic · Number of cables: 5 pcs · Housing material: Steel · Surface: chrome-plated · Substructure material: Steel · Ø Handlebars: 22 mm · Cable length: 970 mm · Width: 30 mm · Total length: 50 mm · Color: Chrome · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Number of positions: 3 pcs · Cable bifurcation to motor: 970 mm · Cable bifurcation to lamp: 180 mm · Cable bifurcation to switch: 420 mm · Height: 25 mm
EUR 19.40
Moped fans also bought
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Nominal diameter: 44 mm · Camouflaged: Yes · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Ø cylinder neck: 48 mm · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Hole pattern [mm]: 44 x 44 · Area of application: Tuning · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Decompressor: Yes
EUR 103.00
Adhesive kit tank & frame black PVC carrier film | Puch Maxi S
Material: Polyvinyl chloride (PVC) · Place of use: Frame (+ tank) · Width: 123 mm · Width: 230 mm · Width: 330 mm · Color: black · Color: white · Rear side texture: Adhesive · Consistency: UV-resistant · Consistency: petrol resistant · Height: 26 mm · Height: 60 mm · Height: 65 mm
EUR 10.80
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Mounting type: Union nut · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.40
swiing® revival nozzle set M3.5 (44 - 54) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Total length: 6 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle size: 44 · Nozzle size: 46 · Nozzle size: 48 · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 54 · Nozzle thread: M3.5x0.6 (standard thread)
EUR 18.20
Collection only possible with online purchase and appointment.
