
Light switch with wiring harness in the basic version for your moped, scooter, and small motorcycle.
The switch unit has three settings, as well as an off switch and a horn button.
Cable length to switch: 40 cm
; cable length to light: 18 cm
; cable length to engine: 50 cm
White – Taillight;
Yellow – Power supply
; Blue – Parking light or headlight
; Green – Parking light or headlight
; Black – Kill switch
Note: Before installation, check all cable clamps in the switch. It is possible that some cable clamps are not tightened sufficiently or have been swapped. See Figure 4 for the correct connection method.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
| Manufacturer | GPO |
| Material | Plastic |
| Number of cables | 5 pcs |
| Housing material | Steel |
| Surface | chrome-plated |
| Substructure material | Steel |
| Color | Chrome |
| Width | 30 mm |
| Functions | Light off, High beam (headlights), Low beam, Horn, Motor stop |
| Number of positions | 3 pcs |
| Cable bifurcation to motor | 970 mm |
| Cable bifurcation to lamp | 180 mm |
| Total length | 50 mm |
| Height | 25 mm |
| Cable length | 970 mm |
| Cable bifurcation to switch | 420 mm |
| Ø Handlebars | 22 mm |
Explore categories from Electrics & light
Moped fans also bought
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Ø outside: 5 mm · Manufacturer: Magura · Number of components: 2 pcs · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Thread length: 4 mm
EUR 2.30
Inner cable set automatic | Puch E50
Manufacturer: Made in Germany · Material: Steel · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Total length: 1600 mm · Total length: 2200 mm
EUR 11.40



