Black, adjustable dampers with fancy red coil springs for your moped, moped and small motorcycle.
The hardness or preload of the dampers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Bush diameter to mount: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
| Manufacturer | GPO |
| Surface | varnished |
| Color | red, black |
| Damping type | Spring |
| Adjustable | Yes |
| Ø spars | 30 mm |
| Total length | 330 mm |
| Number of fixing points | 2 pcs |
| Ø Fastening inside | 10 mm |
| Ø outside | 50 mm |
| Hole spacing | 300 mm |
| Mounting type | Nuts & bolts |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Temperature resistance (min.): -75 - 200 °C · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 25.10
EUR 2’510.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Color: black · Surface: varnished · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø outside: 52 mm · Ø spars: 32 mm · Total length: 335 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 330 mm
EUR 160.50
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Number of components: 17 pcs · Drive: External hexagon · Screw head: Hexagon · Surface: galvanized (blue) · Nominal diameter (thread): 8 mm · Thread type: M8x1.25 (standard thread)
EUR 13.70
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
EUR 20.50
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Material: Aluminum · Material: Steel · Color: Chrome · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø spars: 24 mm · Total length: 335 mm · Surface: chrome-plated · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Mounting type: Nuts & bolts · Number of fixing points: 2 pcs · Hole spacing: 300 mm
EUR 57.30
Explore categories from Shock absorber & swingarm
Moped fans also bought
Hot 
EBR fork reinforced black | Puch
Manufacturer: EWC · Material: Steel · Color: Chrome · Color: black · Adjustable: No · Ø spars: 28 mm · Spar end distance (center-center): 140 mm · Surface: chrome-plated · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Head tube length: 180 mm · Total length: 580 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 57 mm · Fork bridge - center wheel axle: 381 mm · Distance brake cam to wheel axle center-center: 40 mm
EUR 152.50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
