Clutch shoes for the 3-jaw HK clutch with aramid linings (commonly known as Kevlar), compatible with your Puch Maxi S / N, Puch Supermaxi LG1 moped that is equipped with an E50 entry-level engine and an HK roll-on or kick-start clutch.
The centrifugal clutch shoes are lined with a special aramid fiber blend that can withstand even the highest loads.
Note: Compatible only with HK tuning clutches; not compatible with standard E50 centrifugal clutches, as the holes for the springs are drilled larger.
A set consisting of 3 support arms.
You can find additional parts, such as the complete clutch or the clutch plates, in the accessories section.
A quality product from the Dutch manufacturer HK Clutches.
| Manufacturer | HK Clutches |
| Material | Aluminum |
| Material addition | Aramid (colloquially known as Kevlar) |
| Number of jaws | 3 pcs |
| Area of application | Tuning |
| Puch |
Accessories & related products
swiing® revival nut & washer for clutch (kickstart) | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: MF10x1 (fine pitch thread) · Height: 5 mm · Nominal diameter (thread): 12 mm · Drive: External hexagon · Width across flats: 19 mm · Strength class: 8
EUR 6.75
HK clutch "Racing" Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Chrome steel (colloquially known as stainless steel) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 344.10
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Ø inside: 13.6 mm · Ø inside: 14.6 mm · Thickness: 20.3 mm · Manufacturer: HK Clutches · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø outside: 93 mm · Area of application: Racing
EUR 344.10
Explore categories from Clutch
Moped fans also bought
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool · Strength class: 8.8 · Number of components: 1 pcs
EUR 11.40
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 120 mm · Area of application: (Dis)assembly tool · Number of components: 1 pcs
EUR 50.40
GPO clutch trigger M27x1.25, M20x1 | Sachs 503, 50/2, 50/3, 50/4
Width across flats trigger: 27 mm · Manufacturer: GPO · Material: Steel · Surface: blackened · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Total length: 57 mm · Width across flats Screw: 19 mm · Area of application: (Dis)assembly tool · Strength class: 8.8
EUR 22.80
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Height: 16 mm · Ø inside: 64 mm · Ø outside: 75 mm · Area of application: Special tool · Thread type: M6x1 (standard thread) · Number of components: 4 pcs · Thread length: 40 mm · Sachs OEM no.: 0276 057 000
EUR 34.30
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Width across flats: 10 mm · Width across flats: 17 mm · Area of application: (Dis)assembly tool · Number of components: 7 pcs
EUR 22.80
BGS bottom bracket / bottom hole puller with slide hammer
Span: 7 mm · Span: 28 mm · Manufacturer: BGS - Do it yourself · Clamping depth: 10 mm · Clamping depth: 20 mm · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 285 mm · Area of application: (Dis)assembly tool · Number of components: 10 pcs
EUR 149.00
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Ø inside: 27 mm · Thickness: 5 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Diameter: 19 mm · Height: 80 mm · Total length: 290 mm · Ø outside: 93 mm · Area of application: Special tool · Ø Pin: 8 mm · Number of components: 1 pcs
EUR 67.60
Not in stock
swiing® revival ball bearing puller L17 / BO15 / E15 / E20 / 6203 / 6202
Manufacturer: swiing® revival parts · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: E20 · Peel-off tray: L17 · Peel-off tray: 6202 · Peel-off tray: 6203 · Area of application: Special tool · Material: Steel · Surface: galvanized (blue) · Surface: gas nitrided · Number of components: 3 pcs
EUR 45.80
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
