Reinforced pull pin suitable for the manual Z50 engine of Puch X30 Sport NS / NL, as well as Puch X30 Velux mopeds / mopeds.
Design with thrust ball bearing with 60° contact angle and enlarged contact surface on the pivot shaft. In addition, the pull pin is bolted to the bearing and not caulked, which makes it almost impossible to tear out.The reinforced clutch springs in the accessories can be used in conjunction with the clutch bearing without any problems.
Adjusting the clutch is no longer necessary with this version.
Attention: A half-height M10x1 nut must be used to mount the clutch so that the screw connection of the tension bolt cannot touch the nut.
Alternative of the original Puch spare part number: 050.2.1230.0
Details
| Ø outside | 44.75 mm |
| Manufacturer | HS-Retro |
| Material | Steel, Aluminum |
| Color | black |
| Surface | Hardened, anodized |
| Height | 35.2 mm |
| Area of application | Original, High End |
| Alternative version of the Puch OEM number | 050.2.1230.0 |
Suitable for the following models
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 |
Accessories & related products
swiing® revival clutch spring 2-disc version (Version 2.0) | Puch Z50
Spring design: Pressure spring · Total length: 19.5 mm · Ø wire: 4 mm · Manufacturer: swiing® revival parts · Area of application: Original · Material: Spring steel · Area of application: Standard · Surface: raw · Color: gray · Number of components: 1 pcs · Ø inside: 30.5 mm · Ø outside: 39 mm
EUR 20.50
swiing® ingenious clutch spring reinforced +20% (Version 2.0) | Puch Z50
Spring design: Pressure spring · Material: Spring steel · Surface: coated · Manufacturer: swiing® ingenious parts · Total length: 20.5 mm · Ø wire: 4.6 mm · Area of application: Tuning · Number of components: 1 pcs · Ø inside: 30 mm · Ø outside: 39 mm · Color: blue
EUR 27.40
swiing® ingenious clutch spring reinforced +40% (Version 2.0) | Puch Z50
Spring design: Pressure spring · Material: Spring steel · Surface: coated · Manufacturer: swiing® ingenious parts · Total length: 23.5 mm · Ø wire: 4.5 mm · Area of application: Tuning · Number of components: 1 pcs · Ø inside: 30 mm · Ø outside: 39 mm · Color: red
EUR 27.40
Serrated lock washer M10 galvanized
Material: Steel · Surface: galvanized (blue) · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8 · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm
EUR 0.35
Moped fans like you also bought:
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Number of components: 10 pcs · Manufacturer: swiing® revival parts · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 22 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44
EUR 22.80
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 11.30
EUR 25.11/l
Surflex clutch plate set | Puch Z50
Manufacturer: Surflex · Material: Composite materials · Area of application: Original · Material: Steel · Recording type: Interlocking · Number of slats: 2 pcs · Ø inside: 46.3 mm · Ø inside: 51.3 mm · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Thickness: 2.75 mm
EUR 39.90
swiing® ingenious clutch spring reinforced +40% (Version 2.0) | Puch Z50
Spring design: Pressure spring · Material: Spring steel · Surface: coated · Manufacturer: swiing® ingenious parts · Total length: 23.5 mm · Ø wire: 4.5 mm · Area of application: Tuning · Number of components: 1 pcs · Ø inside: 30 mm · Ø outside: 39 mm · Color: red
EUR 27.40
Collection only possible with online purchase and appointment.
