profile
All wishlists Community wishlists
Carousel Image 1
Carousel Image 2
hs-retro-400px

For: Puch

32378

HS-Retro primary wheel 69 teeth | Puch X30 NS, NL

EUR 191.50

Incl. 17% VAT.

Description

Gearwheel of the primary drive for 2-speed manual Z50 engines of Puch X30 NS, NL mopeds / mopeds.
This drive wheel is used in combination with clutch pistons, which have 19 teeth.

Number of teeth: 69
Toothing: helical
Mounting: 3-prong profile

Note: There may be a slight singing after installation until the tooth flanks are ground in cleanly on the clutch basket.

The fastening nut and other parts can be found under accessories.

Original Puch spare part number: 349.3.13.200.1

ManufacturerHS-Retro
MaterialSteel
Toothing typehelical toothed
Ø inside12.5 mm
Recording type3-tooth splined shaft holder
Number of teeth69 pcs
Ø outside95 mm
Puch OEM number349.3.13.200.1
Puch

Z50 (X30 Sport)

Accessories & related products

Cylindrical roller Ø 3.5 x 7.5 Gearbox | Puch Z50
undefined

For: Puch

11498

Cylindrical roller Ø 3.5 x 7.5 Gearbox | Puch Z50

Manufacturer: Puch · Diameter: 3.5 mm · Area of application: Standard · Material: Steel · Surface: Hardened · Width: 7.4 mm

EUR 1.65

M10 locking plate gear wheel 3 teeth | Puch X30 Velux

For: Puch

12276

M10 locking plate gear wheel 3 teeth | Puch X30 Velux

Ø inside: 10.3 mm · Material: Steel · Number of lobes: 3 pcs · Thread size: M10 · Nominal diameter (thread): 10 mm

EUR 7.90

swiing® revival clutch & intermediate plate set (2 pcs.) | Puch Z50
undefined

For: Puch

24082

swiing® revival clutch & intermediate plate set (2 pcs.) | Puch Z50

Manufacturer: swiing® revival parts · Ø inside: 46 mm · Ø inside: 51 mm · Ø outside: 70 mm · Ø outside: 75 mm · Number of slats: 2 pcs · Thickness: 1.5 mm · Thickness: 2.5 mm

EUR 38.90

Normio M10x1 Galvanized Nut
undefined

Universal

24185

Normio M10x1 Galvanized Nut

Manufacturer: Normio · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Width across flats: 17 mm · Height: 8 mm · Nominal diameter (thread): 10 mm · Thread type: MF10x1 (fine pitch thread) · Drive: External hexagon · Tomos OEM number: 215487

EUR 3.30

GPO gear holder countershaft Puch X30 Sport
undefined

For: Puch

24760

GPO gear holder countershaft Puch X30 Sport

Manufacturer: GPO · Area of application: (Dis)assembly tool

EUR 34.30

HS-Retro shift sleeve Z50 (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32368

HS-Retro shift sleeve Z50 (1A quality) | Puch X30 NS, NL

Ø inside: 13.35 mm · Ø outside: 43 mm · Width: 8 mm · Manufacturer: HS-Retro · Material: Steel · Recording type: Cross shot · Puch OEM number: 050.1.1410

EUR 84.30

HS-Retro bearing ring 24/32/7.5 large Z50 (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32371

HS-Retro bearing ring 24/32/7.5 large Z50 (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Ø inside: 23.8 mm · Ø outside: 31.98 mm · Area of application: High End · Area of application: Original · Material: Steel · Surface: hardened & ground · Width: 7.55 mm · Puch OEM number: 329.1.13.065.1

EUR 67.60

HS-Retro bearing race 19.4/28.1/7.5 small Z50 (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32372

HS-Retro bearing race 19.4/28.1/7.5 small Z50 (1A quality) | Puch X30 NS, NL

Manufacturer: HS-Retro · Ø inside: 19.44 mm · Ø outside: 28.1 mm · Area of application: High End · Area of application: Original · Material: Steel · Surface: hardened & ground · Width: 7.5 mm · Puch OEM number: 329.1.13.010.1

EUR 51.50

HS-Retro gearwheel 1st gear 28 teeth (1A quality) | Puch X30 NS, NL
undefined

For: Puch

32373

HS-Retro gearwheel 1st gear 28 teeth (1A quality) | Puch X30 NS, NL

Ø inside: 12.4 mm · Ø outside: 54 mm · Manufacturer: HS-Retro · Material: Steel · Toothing type: straight toothed · Number of teeth: 28 pcs · Ø axle: 12.4 mm · Puch OEM number: 350.1.13.011.1

EUR 122.60

HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
undefined

For: Puch

32379

HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50

Ø inside: 17 mm · Ø outside: 74.8 mm · Manufacturer: HS-Retro · Area of application: High End · Area of application: Original · Material: Steel · Toothing type: helical toothed · Number of teeth: 19 pcs · Height: 26.6 mm · Puch OEM number: 350.1.12.002.2

EUR 183.50

Explore categories from Gearbox & housing (motor)

S-10-30-020-010_Anlauf-Passscheiben
Thrust & shim washers
S-10-30-020-020_Getriebe_Wellen
Gearboxes & shafts
S-10-30-020-030_Schaltmechanismus
Switching mechanism
S-10-30-020-040_Gehaeuseschalen
Housing shells
S-10-30-020-050_Kick_Pedal_Elektrostart
Kick- pedal- & electric start
S-10-30-020-060_Motoraufhaengung
Motor suspension
Flat gasket
Simmerrings
Seals & O-rings
Dichtsatz
Revisionsset

Moped fans also bought

Exhaust 22 mm original 2-piece | Puch X30 Sport NS, NL
undefined

For: Puch

10005

Exhaust 22 mm original 2-piece | Puch X30 Sport NS, NL

Manufacturer: Puch · Material: Steel · Color: Chrome · Surface: chrome-plated · Number of fixing points: 4 pcs · Mounting type: Welded lug · Ø Flame tube outside: 22 mm · Flame tube attachment: Flange

EUR 183.50

Inox
Hot Hot
GPO license plate holder Inox (CH version)
undefined

Universal

10041

GPO license plate holder Inox (CH version)

Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Thread length: 8 mm · Total length: 145 mm · Number of fixing points: 2 pcs · Width: 105 mm · Ø mounting hole: 5 mm · Height: 5.3 mm · Mounting type: Nuts & bolts · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread)

EUR 12.50

Airsal 46 mm cylinder kit straight exhaust | Puch
undefined

For: Puch

10059

Airsal 46 mm cylinder kit straight exhaust | Puch

Nominal diameter: 46 mm · Manufacturer: Airsal · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Crankshaft stroke: 43 mm · Number of fixing points: 4 pcs · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No

EUR 200.70

swiing® revival plain bearing clutch basket | Puch Z50
undefined

For: Puch

10235

swiing® revival plain bearing clutch basket | Puch Z50

Ø inside: 15 mm · Ø outside: 17 mm · Manufacturer: swiing® revival parts · Material: special bearing bronze · Nominal diameter inside: 15 mm · Total height: 16.2 mm

EUR 12.50

swiing® revival Spring Basket, 2-leaf, tall version | Puch Z50 / EX30 (Z50)
undefined

For: Puch

17698

swiing® revival Spring Basket, 2-leaf, tall version | Puch Z50 / EX30 (Z50)

Manufacturer: swiing® revival parts · Ø inside: 24.3 mm · Ø outside: 62 mm · Material: Aluminum · Area of application: Standard · Color: red · Surface: anodized · Height: 28.5 mm · Puch OEM number: 343.1.12.005.1

EUR 57.30

swiing® revival Spring Basket, 2-leaf, low profile | Puch Z50 / EX30 (Z50)
undefined

For: Puch

18710

swiing® revival Spring Basket, 2-leaf, low profile | Puch Z50 / EX30 (Z50)

Manufacturer: swiing® revival parts · Ø inside: 24.3 mm · Ø outside: 62 mm · Material: Aluminum · Area of application: Standard · Color: red · Surface: anodized · Height: 25.95 mm · Puch OEM number: 050.1205

EUR 40.00

Surflex clutch plate set | Puch Z50
undefined

For: Puch

22809

Surflex clutch plate set | Puch Z50

Manufacturer: Surflex · Material: Composite materials · Material: Steel · Thickness: 2.75 mm · Ø inside: 46.3 mm · Ø inside: 51.3 mm · Recording type: Interlocking · Number of slats: 2 pcs · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Area of application: Original

EUR 40.00

Not in stock

swiing® ingenious clutch spring reinforced +40% | Puch Z50
undefined

For: Puch

24034

swiing® ingenious clutch spring reinforced +40% | Puch Z50

Spring design: Pressure spring · Manufacturer: swiing® ingenious parts · Ø inside: 30 mm · Ø outside: 39 mm · Number of components: 1 pcs · Material: Spring steel · Area of application: Tuning · Color: red · Surface: coated · Ø wire: 4.5 mm · Total length: 23.5 mm

EUR 27.40

HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
undefined

For: Puch

32379

HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50

Ø inside: 17 mm · Ø outside: 74.8 mm · Manufacturer: HS-Retro · Area of application: High End · Area of application: Original · Material: Steel · Toothing type: helical toothed · Number of teeth: 19 pcs · Height: 26.6 mm · Puch OEM number: 350.1.12.002.2

EUR 183.50