46 mm racing cylinder from Airsal suitable for Puch Maxi S & N, X30 Sport.
The racing kit has a straight exhaust, which is why standard exhausts for Puch mopeds can be fitted.
This is the largest possible racing kit that can be fitted without having to remove the engine housing.
| Manufacturer | Airsal |
| Material | Aluminum |
| Camouflaged | No |
| Surface | sandblasted |
| Crankshaft stroke | 43 mm |
| Nominal diameter | 46 mm |
| Thread inlet | M6x1 (standard thread) |
| Ø piston pin (B) | 12 mm |
| Outlet type | straight |
| Hole spacing outlet | 42 mm |
| Thread outlet | M6x1 (standard thread) |
| Number of fixing points | 4 pcs |
| Hole pattern [mm] | 44 x 44 |
| Hole spacing inlet | 38 mm |
| Area of application | Tuning |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
Airsal piston 46 mm | Puch
Nominal diameter: 46 mm · Manufacturer: Airsal · Ø outside piston (A): 45.95 mm · Compression height (C): 21.8 mm · Curvature (D): 3.7 mm · Total piston height (E): 48.6 mm · Number of piston rings (F): 1 pcs · Piston ring mold: L-ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston weight: 98 g
EUR 43.30
Airsal cylinder head 46 / 47 mm | Puch
Material: Aluminum · Surface: sandblasted · Total length: 180 mm · Width: 165 mm · Height: 60 mm · Manufacturer: Airsal · Number of fixing points: 4 pcs · Camouflaged: No · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø cylinder: 46 - 47 mm · Ø screw holder: 7.2 mm · Candle thread: short · Hole pattern [mm]: 44 x 44 · Decompressor: No
EUR 60.50
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Manufacturer: swiing® ingenious parts · Bearing cage: Silver cage · Ø outside: 15 mm · Ø inside: 12 mm · Dimension needle bearing: 12/15 x 14.2 · Width: 14.2 mm · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
EUR 13.60
Moped fans also bought
Dell'Orto 19 mm PHBG CS carburetor hand choke
Manufacturer: Dell'Orto · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Color: black · Carburetor type: PHBG CS · Nominal diameter: 19 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 75 · Size of secondary nozzle: 45 · Mounting type: Plug connection clamped · Total length: 82 mm · Width: 70 mm · Height: 124 mm · Area of application: Racing · Area of application: Tuning
EUR 137.00
Airsal intake manifold 46 / 47 mm cylinder | Puch
Material: Aluminum · Manufacturer: Airsal · Mounting type: Screws · Number of fixing points: 2 pcs · Camouflaged: No · Ø inside: 19 mm · Area of application: Tuning · Ø External connection: 24 mm · Total length: 60 mm · Height flange center hole: 65 mm · Hole spacing inlet: 38 mm · Total height: 75 mm
EUR 45.60
Collection only possible with online purchase and appointment.
