Technical data sheet DE
Danger:
Loctite 638 is an oil-tolerant, high-strength adhesive with a wide range of applications.
Fast-hardening, with high strength. For fastening cylindrical parts such as bushes, bolts, gears, bearings, etc. For sliding fits with little play and for improving the strength of press and transition fits. Tolerates low levels of oil-like contamination.
Tested and recommended by leading roller bearing manufacturers.
Strength: high
Hand strength (at room temperature on steel): 5 min
Bonding gap: up to 0.25 mm
Temperature resistance: up to 150 °C
Original Loctite product from the German manufacturer Henkel.
| Temperature resistance (min.) | -75 - 150 °C |
| Manufacturer | Loctite |
| Material to be used | Metal, Aluminum, Steel |
| Contents | 10 ml |
| Color | green |
| Hazard warning | Causes serious eye damage, Causes skin irritation, May cause allergic skin reactions, May irritate the respiratory tract, Harmful to aquatic organisms (with long-term effects) |
| Adhesion | high-strength |
| Gap dimension (max.) | 0.25 mm |
| Type of application | 1K |
| Alignment time | 300 sec |
| Breakaway torque (according to material) | 23 N/m, 25 N/m, 57 N/m |
| Area of application | Chemistry |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.10
EUR 2’510.00/l
Loctite 638 Joining shaft-hub high-strength 50 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 50 ml · Color: green · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: high-strength · Gap dimension (max.): 0.25 mm · Area of application: Chemistry · Temperature resistance (min.): -75 - 150 °C · Type of application: 1K · Alignment time: 300 sec · Breakaway torque (according to material): 23 N/m · Breakaway torque (according to material): 25 N/m · Breakaway torque (according to material): 57 N/m
EUR 77.90
EUR 1’558.00/l
Loctite 222 Low-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Steel · Color: violet · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: low strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 1200 sec · Temperature resistance (min.): -55 - 150 °C · Breakaway torque (according to material): 6 N/m · Breakaway torque (according to material): 14 N/m · Area of application: Chemistry
EUR 25.10
EUR 2’510.00/l
Loctite 270 High-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Steel · Color: green · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -55 - 180 °C · Breakaway torque (according to material): 5 N/m · Breakaway torque (according to material): 31 N/m · Breakaway torque (according to material): 33 N/m
EUR 25.10
EUR 2’510.00/l
Loctite 242 medium-strength threadlocker 50 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Contents: 50 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: May irritate the respiratory tract · Hazard pictogram: GHS07 - Caution dangerous · Adhesion: medium strength · Temperature resistance (min.): 0 - 150 °C · Gap dimension (max.): 0.01 mm · Alignment time: 300 sec · Breakaway torque (according to material): 7.9 N/m · Breakaway torque (according to material): 17 N/m
EUR 83.60
EUR 1’672.00/l
Loctite 278 High-strength threadlocker 50 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Steel · Type of application: 1K · Area of application: Chemistry · Color: green · Contents: 50 ml · Hazard warning: Causes serious eye damage · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Danger · Adhesion: medium strength · Temperature resistance (min.): -55 - 200 °C · Gap dimension (max.): 0.25 mm · Alignment time: 1200 sec · Breakaway torque (according to material): 42 N/m
EUR 83.60
EUR 1’672.00/l
Explore categories from Engine block
Moped fans also bought
Hot 
swiing® revival nozzle set M5 (50 - 70) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Material: Brass · Drive: Slot · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 50 · Nozzle size: 52 · Nozzle size: 55 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70
EUR 24.00
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Color: blue · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.10
EUR 2’510.00/l
NGK B8ES spark plug long thread
Manufacturer: NGK · Candle designation: B8ES · Candle thread type: long · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Width across flats: 21 mm · Thread type: MF14x1.25 (fine pitch thread) · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 7.45
Dell'Orto 13/13 SHA carburetor hand choke | Piaggio Ciao PX / C24, Bravo, SUPERbravo
Width: 60 mm · Manufacturer: Dell'Orto · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: SHA (Piaggio) · Total length: 46 mm · Nominal diameter: 13 mm · Ø fuel hose connection: 5.2 mm · Ø fuel hose connection: 6 mm · Height: 96 mm · Ø without reducing sleeve: 18 mm · Ø Inside entrance: 13 mm · Mounting type: Plug connection clamped · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm · Ø Internal connection: 16 mm · Mixed oil connection: No · Area of application: Tuning · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 66
EUR 68.70
Hot
Airsal 43.5 mm cylinder kit Beta | Cilo Cross 521 / 512, Pony Cross 521, Pony GTX 521
Nominal diameter: 43.5 mm · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 57 ccm · Crankshaft stroke: 39 mm · Ø cylinder neck: 45.5 mm · Ø Outlet outside: 18 mm · Ø Outlet outside: 21 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 38 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 48 x 48 · Camouflaged: No · Area of application: Tuning
EUR 229.30
Not in stock
Airsal tuning set 43.5 mm | Beta 521 engine
Nominal diameter: 60 mm · Manufacturer: Airsal · Manufacturer: Dell'Orto · Manufacturer: NGK · Manufacturer: SITO · Manufacturer: swiing® ingenious parts · Manufacturer: swiing® revival parts · Displacement: 60 ccm · Ø piston pin (B): 12 mm · Outlet type: straight · Camouflaged: No · Area of application: Tuning
EUR 458.80
Not in stock
Loctite 270 High-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Steel · Color: green · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS05 - Corrosive · Hazard pictogram: GHS07 - Caution dangerous · Area of application: Chemistry · Adhesion: high-strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -55 - 180 °C · Breakaway torque (according to material): 5 N/m · Breakaway torque (according to material): 31 N/m · Breakaway torque (according to material): 33 N/m
EUR 25.10
EUR 2’510.00/l
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
