Market innovation: Lockable aluminum tank box for your Puch Maxi S / N moped.
The transport box is ideal for longer trips and offers an amazing amount of storage space for luggage. Protected from the rain and lockable with a key, you can even store documents, a wallet, cell phone, etc.
The completely handcrafted box is bead-blasted, perfectly fitting and cleanly finished.
The box fits perfectly in the tank area with sufficient space between it and the frame. This ensures that no scratches or damage to the paintwork can occur.
The crate is supplied completely disassembled. However, all stainless steel fastening materials, locks, sealing rubbers, etc. are included in the scope of delivery.
Installation instructions:
- The rear fastening straps are screwed to the crate and attached to the saddle clamp.
- The lower fastening straps are placed over the side bars and clamped using the screws supplied. The rubber washers supplied serve as dampers. The distance between the brackets can be determined using the slotted bars. On some old Puch Maxi N models, four new holes may need to be drilled.
Length: 460 mm
Width: 220 mm
Height: 210 mm
Weight: approx. 800 g
Material: Aluminum, glass bead blasted
Attachment parts: All mounting material is made of stainless steel (INOX)The seals should be sprayed with silicone spray so that they remain intact for a long time and do not stick to the aluminum.
Scope of delivery according to illustrations 1 - 3. The other illustrations are for illustrative purposes only.
Other useful items for on the go such as cell phone holders, travel bags, repair kits etc. can be found in the accessories section.
A quality product made in Switzerland.
| Manufacturer | Made in Switzerland |
| Material | Aluminum, Chrome steel (colloquially known as stainless steel) |
| Surface | glass bead blasted |
| Color | silver |
| Width | 220 mm |
| Height | 210 mm |
| Number of fixing points | 3 pcs |
| Total length | 460 mm |
| Mounting type | Screws |
| Ø mounting hole | 5.5 mm, 8.5 mm |
| Puch | E50 ZA50 (air-cooled) |
Accessories & related products
GPO cell phone holder up to 5" (waterproof)e handlebar mount, 360° rotatable
Color: black · Total length: 160 mm · Manufacturer: GPO · Material: Plastic · Protection class: waterproof · Screen diagonal: 1 - 5 " · Width: 90 mm · Height: 30 mm · Wide handlebar clamp: 27 mm · Ø Handlebars: 18 - 28 mm
EUR 28.60
EUR 14.30
GPO cell phone holder up to 5.5" (waterproof)e handlebar mount, 360° rotatable
Color: black · Total length: 170 mm · Manufacturer: GPO · Material: Plastic · Protection class: waterproof · Screen diagonal: 1 - 5.5 " · Width: 100 mm · Height: 30 mm · Wide handlebar clamp: 27 mm · Ø Handlebars: 18 - 28 mm
EUR 28.60
EUR 14.30
GPO cell phone holder up to 6.3" (waterproof) handlebar mount, 360° rotatable
Manufacturer: GPO · Material: Plastic · Color: black · Protection class: waterproof · Screen diagonal: 1 - 6.3 " · Wide handlebar clamp: 27 mm · Ø Handlebars: 18 - 28 mm · Total length: 180 mm · Width: 105 mm · Height: 30 mm
EUR 28.60
EUR 14.30
Explore categories from Luggage carrier & trailer coupling
Moped fans also bought
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Width across flats Screw: 13 mm · Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Thread type: M8x1.25 (standard thread) · Thread length: 12 mm · Screw head: Hexagon · Total length: 18 mm · Drive: External hexagon · Drive: Slot · Puch OEM number: 901.1053
EUR 4.00
swiing® revival gearbox cover gasket (old model) | Puch Z50 engine
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Total length: 166 mm · Thickness: 0.35 mm · Number of components: 1 pcs · Number of fixing points: 8 pcs · Width: 155 mm · Puch OEM number: 349.1.10.249.1
EUR 4.50
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Number of components: 1 pcs · Diameter: 24 mm · Diameter: 40.3 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Total length: 120 mm · Area of application: (Dis)assembly tool
EUR 50.40
swiing® revival press-in bolt bearings & shaft seals | Puch Z50
Ø inside: 17.4 mm · Ø outside: 39.5 mm · Total length: 79.9 mm · Manufacturer: swiing® revival parts · Diameter: 34.6 mm · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Special tool · Ø Pin: 16.5 mm
EUR 45.80
Working late? Evening hours on Thursday until 20:00
