Special exhaust for various Puch mopeds / mopeds which are equipped with a racing cylinder. The racing silencer fits cylinders with a narrow outlet.
This racing exhaust impresses with its solid construction and high-quality workmanship. The silencer is lined with stainless sheet steel (chrome steel).
Ideally, the tuning muffler should be used in conjunction with cylinder kits from 46 mm to exploit the full power.
Due to the huge resonance body, this racing muffler gives your moped a brute increase in power in the middle and upper speed range.
Mounting aids and other add-on parts can be found in the accessories section.
Handmade quality product from the manufacturer MLM.
| Manufacturer | MLM |
| Material | Steel |
| Color | black |
| Exhaust type | Cone / double cone |
| Mounting type | Welded lug |
| Flame tube attachment | Flange |
| Number of fixing points | 1 pcs |
| Puch | E50 |
Ratings
Accessories & related products
Metrakit 47 mm cylinder kit 75 ccm
Nominal diameter: 47 mm · Manufacturer: Metracite · Material: Gray cast iron · Surface: varnished · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No · Area of application: Tuning
EUR 378.90
Not in stock
Airsal 47 mm cylinder kit angled exhaust | Puch
Manufacturer: Airsal · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Nominal diameter: 47 mm · Number of fixing points: 4 pcs · Area of application: Tuning · Ø piston pin (B): 12 mm · Thread inlet: M6x1 (standard thread) · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Hole spacing inlet: 38 mm
EUR 189.40
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Manufacturer: Gilardoni italkit · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Nominal diameter: 47 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Number of fixing points: 4 pcs · Ø Inlet inside: 18.3 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Outlet type: slanted · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm
EUR 234.00
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Ø inside: 27.4 mm · Reinforced: No · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Thickness: 3 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 8.25
Explore categories from Exhaust system
Moped fans also bought
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 11.00
EUR 24.44/l
Simonini carbon exhaust | Puch
Manufacturer: Simonini · Material: Steel · Surface: varnished · Ø Silencer: 60 mm · Ø Internal connection: 24 mm · Ø outside: 90 mm · Mounting type: Welded lug · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Total length: 875 mm · Flame tube attachment: Flange · Number of fixing points: 1 pcs
EUR 245.10
Cable set cut with adjusting screws | Puch Maxi
Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Color: black · Quantity: 4 pcs · Outer shell length: 1120 mm · Outer shell length: 1150 mm · Total length: 1200 mm · Total length: 1250 mm · Total length: 1450 mm · Outer shell length: 1740 mm · Total length: 1830 mm
EUR 38.90
DMP intake rubber Ø 33.5 / 33.5 x 31.5 with clamps
Manufacturer: DMP · Material: Rubber · Overall length (A): 31.3 mm · Color: black · Ø Passage (B): 30.7 mm · Ø inside (C): 33.5 mm · Ø inside 2 (D): 33.5 mm · Ø outside (E): 46.5 mm · Ø outside 2 (F): 46.5 mm · Ø External connection (G): 46.5 mm · Ø External connection 2 (H): 46.5 mm · Ø Clamping (I): 32.5 mm · Ø Clamping 2 (K): 32.5 mm
EUR 14.40
Rear fender blank | Puch Maxi S, Supermaxi LG1 / LG2
Material: Steel · Surface: blank / oiled · Color: silver · Folding the ends: not folded · Folding the ends: open folded · Shape of the mudguard: angular · Wheel size: 17 " · Total length over ends: 420 mm · Scope: 480 mm · Wide mudguard profile: 73 mm · Wide mudguard profile: 75 mm · Height of mudguard profile: 30 mm · Height of mudguard profile: 60 mm · Total height from support surface to top edge: 110 mm · Mounting type: Weld
EUR 33.30
Collection only possible with online purchase and appointment.
