Shaft seal ring 15x30x9 mm for use on the crankshaft of your Sachs moped / moped with Sachs ADV, AB and AC engine.
This shaft seal ring (colloquially known as a radial shaft seal) is mounted on the crankshaft on the end face.
Ø inner: 15 mm
Ø outer: 30 mm
Width: 9 mm
Material: NBR
Temperature-resistant: -30 to +100 °C, briefly up to 120 °C
B DUO - With sheet metal outer casing and two sealing lips.
Original spare part number: A1832
| Temperature resistance (min.) | -30 - 100 °C |
| Material | NBR |
| Shaft seal type | B DUO - With sheet metal outer casing / two sealing lips. |
| Manufacturer | Sachs |
| Place of use | Crankshaft |
| Width | 9 mm |
| Ø outside | 30 mm |
| Ø inside | 15 mm |
| Sachs | 503 - AB, AC, ADV |
Ratings
Accessories & related products
Large gasket set with shaft seals Engine | Sachs 503
Number of components: 14 pcs · Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Hole spacing inlet: 32 mm · Ø outlet inside: 13.3 mm · Hole pattern [mm]: 60 x 40
EUR 46.10
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Area of application: Chemistry · Material: Silicone · Color: gray · Contents: 70 ml · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C
EUR 23.00
EUR 328.57/l
Elring Dirko HT sealing compound red (silicone) high temp. 70 ml elastic up to 315°C
Manufacturer: Elring · Color: red · Contents: 70 ml · Hazard warning: Causes serious eye irritation · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 300 °C · Area of application: Chemistry
EUR 26.40
EUR 377.14/l
Moped fans also bought
Oil seal NBR 17/33/7 B DUO crankshaft | Sachs 503 AB, ADV
Temperature resistance (min.): -30 - 100 °C · Shaft seal type: B DUO - With sheet metal outer casing / two sealing lips. · Manufacturer: Sachs · Material: NBR · Width: 7 mm · Place of use: Crankshaft · Ø inside: 17 mm · Ø outside: 33 mm
EUR 10.30
NSK 6201 ball bearing 12/32/10
Bearing cage: Sheet steel cage ball-guided · Stock number: 6201 · Inner ring width: 10 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CM (special/noise-reduced) · Groove ring: No · Material: Steel · Surface: blank · Width: 10 mm · Bearing type: Shoulder bearing · Ø inside: 12 mm · Ø outside: 32 mm · Area of application: Standard
EUR 9.80
swiing® revival engine seal | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1884)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø inside: 87 mm · Width: 140 mm · Total length: 233 mm · Thickness: 0.4 mm · Number of fixing points: 9 pcs · Pony OEM number: A1884 · Sachs OEM no.: 0250 149 100
EUR 6.25
swiing® revival gearbox cover gasket | Sachs 503 AAL, ABL, AB, AC, ADV, 2AL, 2BL (A1888)
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Total length: 200 mm · Width: 130 mm · Thickness: 0.35 mm · Number of fixing points: 6 pcs · Pony OEM number: A1888 · Sachs OEM no.: 0250 150 000
EUR 6.25
Shaft seal NBR 14.96x31.5x3.5 Pinion shaft | Sachs 502, 50/2, 503 (A1134)
Temperature resistance (min.): -30 - 100 °C · Manufacturer: Sachs · Material: NBR · Ø inside: 14.96 mm · Ø outside: 31.5 mm · Surface: coated · Width: 3.5 mm · Place of use: Pinion shaft · Area of application: Standard · Pony OEM number: A1134 · Sachs OEM no.: 0230 011 100 · Sachs OEM no.: 0230 011 200
EUR 8.65
NTN 6202 Ball bearing 15/35/11
Manufacturer: NTN · Material: Steel · Surface: blank · Bearing type: Deep groove ball bearing · Stock number: 6202 · Inner ring width: 11 mm · Ball bearing closed: No · Ø outside: 35 mm · Bearing clearance: CM (special/noise-reduced) · Bearing cage: Sheet steel cage ball-guided · Groove ring: No · Ø inside: 15 mm · Width: 11 mm
EUR 7.95
Collection only possible with online purchase and appointment.
