Black, adjustable shock absorbers with pink coil springs for your moped, moped and small motorcycle.
The hardness or preload of the shock absorbers can be adjusted using the special spring mount.
Length (mount - mount): 300 mm
Outer diameter of coil spring: 50 mm
Holt diameter: 30 mm
Wall diameter for mounting: 10 mm
The rear springs should always be secured with large washers to prevent the plastic bushes from shifting if lateral forces occur.
The scope of delivery corresponds to one pair.
Rear springs from other manufacturers, the matching adjustment key as well as the washers and fastening material can be found in the accessories section.
| Surface | varnished |
| Damping type | Spring |
| Ø outside | 50 mm |
| Adjustable | Yes |
| Ø Fastening inside | 10 mm |
| Ø spars | 30 mm |
| Hole spacing | 300 mm |
| Number of fixing points | 2 pcs |
| Color | pink, black |
| Mounting type | Nuts & bolts |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Color: blue · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 24.40
EUR 2’440.00/l
YSS shock absorber Racing 30 cm (oil pressure)
Manufacturer: YSS · Material: Steel · Surface: varnished · Color: black · Damping type: Hydraulic (oil) · Adjustable: Yes · Ø Fastening inside: 10 mm · Ø spars: 32 mm · Ø outside: 52 mm · Mounting type: Nuts & bolts · Hole spacing: 330 mm · Number of fixing points: 2 pcs
EUR 156.00
swiing® revival screws & axle set shock absorber | Puch Maxi S
Drive: External hexagon · Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Number of components: 17 pcs · Screw head: Hexagon
EUR 20.00
MKX shock absorber 30 cm chrome
Manufacturer: MKX · Material: Aluminum · Material: Steel · Surface: chrome-plated · Damping type: Spring · Ø outside: 46 mm · Adjustable: Yes · Color: Chrome · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Mounting type: Nuts & bolts · Hole spacing: 300 mm · Number of fixing points: 2 pcs
EUR 55.60
Explore categories from Shock absorber & swingarm
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Ø mounting hole: 5 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs
EUR 12.10
Not in stock
- 10 %
Hot
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Color: silver · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 9.80
EUR 8.80
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Nominal diameter: 15 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 66 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
EUR 72.40
Not so nice 
15 mm intake manifold | Puch E50
Ø inside: 14.5 mm · Material: Aluminum · Total length: 47 mm · Mounting type: Screws · Hole spacing inlet: 38 mm · Total height: 54 mm · Height flange center hole: 43 mm · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Camouflaged: Yes · Area of application: Tuning
EUR 13.30
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Number of teeth: 10 pcs · Total length: 175 mm · Thread type: M6x1 (standard thread) · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs · Color: black · Color: silver
EUR 11.00
Collection only possible with online purchase and appointment.
