High-quality center kickstand for Piaggio Ciao mopeds / mopeds with 14 mm bolts.
This center kickstand was fitted as standard on the newer PX and C24 models.
The center rod is supplied complete with spring, bolt (Ø14x100 mm) and circlips (fuel rings).
Note: Older spoke wheel models had a 10 mm bolt. However, the hole in the P and SC models was often drilled out so that a spokes with a 14 mm axle can be fitted. Check the dimensions of the bolt before purchasing.
You can find more parts for your Piaggio Ciao as well as the main stem with 10 mm bolt in the accessories section.
A quality product made in Italy.
Original Piaggio spare part number: 25523001
Details
| Manufacturer | Made in Italy |
| Material | Steel |
| Surface | varnished |
| Color | black |
| Stand base - center mount (A) | 232 mm |
| Total width of stand base (B) | 200 mm |
| Wide receptacle (C) | 78 mm |
| Ø Receptacle (D) | 14 mm |
| Wide upright foot (F) | 20 mm |
| Total height | 250 mm |
Suitable for the following models
| Piaggio | Ciao - PX, C24 |
Accessories & related products
SITO Plus exhaust Ø 24 mm | Piaggio Ciao, Bravo
Manufacturer: SITO · Material: Steel · Surface: varnished · Ø outside: 14 mm · Color: black · Total length: 690 mm · Ø Silencer: 70 mm · Ø Internal connection: 22 mm · Mounting type: Welded lug · Ø Flame tube outside: 24 mm · Exhaust type: Cylindrical · Number of fixing points: 1 pcs · Flame tube attachment: Plug connection clamped
EUR 85.70
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: Malossi · Area of application: Tuning · Material: Gray cast iron · Surface: sandblasted · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 10 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
EUR 165.90
Main stand 10 mm axle without bolt | Piaggio Ciao P, SC
Manufacturer: Made in Italy · Material: Steel · Surface: varnished · Color: black · Stand base - center mount (A): 230 mm · Total width of stand base (B): 200 mm · Wide receptacle (C): 77 mm · Ø Receptacle (D): 10 mm · Wide upright foot (F): 20 mm · Total height: 250 mm · Piaggio OEM number: 104626
EUR 34.20
Main stand 14 mm axle | Piaggio Ciao PX, C24
Material: Steel · Surface: varnished · Stand base - center mount (A): 230 mm · Total width of stand base (B): 210 mm · Wide receptacle (C): 80 mm · Ø Receptacle (D): 14 mm · Wide upright foot (F): 15 mm · Total height: 245 mm · Color: black · Piaggio OEM number: 25523001
EUR 26.20
Dell'Orto 13/13 SHA carburetor & racing air filter set | Piaggio Ciao PX, C24
Nominal diameter: 13 mm · Manufacturer: Dell'Orto · Manufacturer: Malossi · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SHA (Piaggio) · Choke control: Hand choke · Width: 60 mm · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 46 mm · Height: 96 mm · Ø without reducing sleeve: 18 mm · Nozzle size: 66 · Mounting type: Plug connection clamped · Ø Inside entrance: 13 mm · Ø Internal connection: 16 mm · Ø Output inside: 13 mm · Ø Air filter connection: 50.8 mm
EUR 76.60
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Thread type: MF12x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Mounting type: Union nut · Outlet direction: below · Spare tube shape: curved · Reserve level: 70 mm
EUR 11.30
Headlight black | Piaggio Ciao PX, C24
Manufacturer: Made in Italy · Area of application: Original · Area of application: Standard · Test mark: none · Bulb holder: P26s · Housing material: Plastic · Color: black · Tension: 6 V · Tension: 12 V · Lens material: Plastic · Width: 125 mm · Height: 90 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Speedometer recording: 48 mm · Depth: 147 mm · Switch included: Yes · Battery operated: No · Ø External connection: 6.3 mm · Piaggio OEM number: 584240
EUR 43.40
Tail light black | Piaggio Ciao PX, C24, Bravo
Manufacturer: Made in Italy · Material: Plastic · Test mark: none · Color: black · Color: red · Width: 130 mm · Bulb holder: BA9s · Height: 58 mm · Number of fixing points: 2 pcs · Depth: 43 mm · Brake light: No · Battery operated: No · Reflectors: Yes · Mounting type: Nuts & bolts
EUR 21.60
GPO control bearing set | Piaggio Ciao
Bearing type: Bearing ring · Manufacturer: GPO · Material: Steel · Surface: galvanized (blue) · Color: silver · Ø outside: 41.4 mm · Ø outside: 42 mm · Ø inside: 27 mm · Ø mounting frame: 30.05 mm · Thread type: FG25.4 (1" 24G) · Height: 10.5 mm · Height: 17 mm · Ø ball [inch] / [mm]: 5/32" (4.00 mm)
EUR 21.60
Cable set black | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Color: black · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Outer shell length: 1200 mm · Outer shell length: 1250 mm · Outer shell length: 1300 mm · Outer shell length: 2000 mm · Nipple shape: Ball · Nipple shape: Barrel (transverse) · Nipple shape: Pears · Total length: 1350 mm · Total length: 1600 mm · Total length: 2180 mm
EUR 22.80
GPO chain tensioner | Piaggio Ciao
Width: 45 mm · Total length: 64 mm · Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Color: silver · Thread type: M8x1.25 (standard thread) · Number of teeth: 8 pcs · Number of fixing points: 1 pcs · Ø outside sprocket: 33 mm
EUR 10.80
Collection only possible with online purchase and appointment.
