Battery-powered rev counter for adjusting the engine of your moped, moped and small motorcycle.
With this marvel of technology, you can precisely measure the speed and test and optimize any changes made. The measurable maximum speed is 16,000 rpm.
The crocodile clip supplied is attached to the ignition cable to show the brute force of your 2-stroke carriage in black and white. Alternatively, the measurement can be carried out either via the supplied cable antenna or at close range by means of telekinesis (inductive) by simply holding the plug connector.
Note: For the measurement of electronic ignitions, the device must be set accordingly. Instructions are included in the scope of delivery.
Other useful tools can be found under accessories.
Quality product from the German manufacturer STIHL.
| Manufacturer | STIHL |
| Material | Plastic |
| Color | white |
| Signal type Tacho | GPS / digital |
| Depth | 35 mm |
| Total length | 55 mm |
| Total height | 15 mm |
Ratings
Accessories & related products
Moped fans also bought
Hot 
KMC drive chain 415H (reinforced) 128L
Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Number of chain links: 128 pcs · Color: gray · Chain pitch: 1/2" x 3/16" · Ø bore: 4 mm · Rolling circumference: 1626 mm · Chain lock type: Spring lock · Ø Pin: 3.94 mm
EUR 14.40
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Displacement: 65 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 44 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Inlet window: 24 / 20 x 15 · Hole spacing inlet: 38 mm · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Outlet type: straight · Ø piston pin (B): 12 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Area of application: Tuning · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Camouflaged: Yes
EUR 103.80
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Number of components: 4 pcs · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Area of application: Tuning · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 11.40
Hot
swiing® revival 12 mm carburetor "Original" | Puch
Manufacturer: swiing® revival parts · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 12 mm · Choke control: Hand choke · Color: gray · Width: 50 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 65 mm · Height: 108 mm · Nozzle size: 52 · Mounting type: Plug connection clamped · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Ø Output inside: 12 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Area of application: Standard · Nozzle block: 2.15 · Camouflaged: No · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0
EUR 80.70
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Material: Graphite / Graphite · Place of use: Exhaust · Reinforced: No · Thickness: 3 mm · Ø inside: 27.4 mm · Ø outlet inside: 28 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm · Area of application: Tuning
EUR 8.55
Collection only possible with online purchase and appointment.
