Additional weight for MVT, Selettra and PVL internal rotor race systems suitable for various mopeds, mopeds and small motorcycles (e.g. Puch Maxi, Puch X30 Sport, Puch X30 Velux, Sachs 503, Sachs 50/2, Zündapp Belmondo, Kreidler etc.). To be able to use the additional weight, the swiing adapter plate must be fitted beforehand. The additional weight can then be attached to it.
We recommend securing all screws with Loctite.
Ø inside: 24.5 mm
Ø outside: 65 mm
Plate thickness: 4 mm
Weight of the plate without screws: 80 grams
Weight of the plate with screws: 87 grams
Material: Steel, galvanized
The additional weight gives your engine a smooth, even running when stationary and improves the "starting behaviour". Depending on the setting, even more torque can be achieved with the additional weight.
You can find the swiing adapter plate (100g / 110g) in the accessories section.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Area of application | Performance, Racing, High End, Tuning |
| Ø outside | 65 mm |
| Ø inside | 24.5 mm |
| Thickness | 4 mm |
| Weight | 87 g |
| Number of fixing points | 3 pcs |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 503 - AB , AC , ADV 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A 535 |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Type of application: 1K · Contents: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Color: blue · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 24.40
EUR 2’440.00/l
swiing® ingenious fan wheel black (EVO, HPI, Bosch, Ducati) | Sachs 50/2, 50/3
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Ø outside: 110 mm · Ø inside: 39 mm · Number of fixing points: 6 pcs · Ø mounting hole: 6 mm · Weight: 116 g · Height: 25 mm · Ø bolt circle: 48 mm · Alternative version of the Pony OEM number: A1026 · Alternative version of the Sachs OEM number: 0211 070 105
EUR 66.80
swiing® ingenious 124 g additional weight MVT, PVL, Selettra
Ø outside: 65 mm · Manufacturer: swiing® ingenious parts · Weight: 131 g · Material: Steel · Surface: galvanized (blue) · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 4 mm · Number of fixing points: 3 pcs
EUR 21.50
Screw M6x8 countersunk head hexagon socket, galvanized (10.9 strength)
Drive: Hexagon socket · Screw head: Countersunk head · Ø External head: 12 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Total length: 8 mm · Thread length: 8 mm · Shank: No · Number of components: 1 pcs · Strength class: 10.9
EUR 2.45
Moped fans also bought
- 12 %
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Ø nipple: 3 mm · Nipple length: 5 mm · Area of application: Standard · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Number of components: 1 pcs
EUR 2.70
EUR 2.35
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Material: Brass · Manufacturer: swiing® revival parts · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Total length: 6 mm · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 17.70
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11.00
EUR 9.90
EUR 22.00/l
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Material: Aluminum · Manufacturer: swiing® ingenious parts · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Total length: 66 mm · Nominal diameter: 15 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Mixed oil connection: No · Mounting type: Plug connection clamped · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 89.10
swiing® revival nozzle set M3.5 (10 pcs. of your choice) Bing SRE, SRA, SRC, SRF
Drive: Slot · Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 41 · Nozzle size: 42 · Nozzle size: 43 · Nozzle size: 44 · Nozzle size: 45 · Nozzle size: 46 · Nozzle size: 47 · Nozzle size: 48 · Nozzle size: 49 · Nozzle size: 50 · Nozzle size: 51 · Nozzle size: 52 · Nozzle size: 53 · Nozzle size: 54 · Nozzle size: 55 · Nozzle size: 56 · Nozzle size: 57 · Nozzle size: 58 · Nozzle size: 59 · Nozzle size: 60 · Nozzle size: 61 · Nozzle size: 62 · Nozzle size: 63 · Nozzle size: 64 · Nozzle size: 65 · Nozzle size: 67 · Nozzle size: 68 · Nozzle size: 69 · Nozzle size: 70 · Nozzle size: 71 · Nozzle size: 72 · Nozzle size: 73 · Nozzle size: 74 · Nozzle size: 75 · Nozzle size: 76 · Nozzle size: 77 · Nozzle size: 78 · Nozzle size: 79 · Nozzle size: 80 · Nozzle size: 81 · Nozzle size: 82 · Nozzle size: 83 · Nozzle size: 84 · Nozzle size: 85 · Nozzle size: 86 · Nozzle size: 87 · Nozzle size: 88 · Nozzle size: 89 · Nozzle size: 90 · Nozzle size: 91 · Nozzle size: 92 · Nozzle size: 93 · Nozzle size: 94 · Nozzle size: 95 · Nozzle size: 96 · Nozzle size: 97 · Nozzle size: 98 · Nozzle size: 99 · Nozzle size: 100
EUR 38.90
swiing® ingenious 124 g additional weight MVT, PVL, Selettra
Ø outside: 65 mm · Manufacturer: swiing® ingenious parts · Weight: 131 g · Material: Steel · Surface: galvanized (blue) · Ø inside: 24.5 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 4 mm · Number of fixing points: 3 pcs
EUR 21.50
swiing® ingenious 100 g additional weight / adapter plate | MVT, PVL, Selettra
Ø outside: 65 mm · Manufacturer: swiing® ingenious parts · Weight: 110 g · Material: Steel · Surface: galvanized (blue) · Ø inside: 24.5 mm · Ø mounting hole: 6 mm · Ø bolt circle: 50 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 9 mm · Number of fixing points: 4 pcs
EUR 40.70
Collection only possible with online purchase and appointment.
