
Cable starter guard made of stainless steel (chrome steel) for all swiing cable starters for clockwise rotating Puch E50 engines on your Puch Maxi S / N and Puch Supermaxi LG1 moped.
All mounting material is included in the scope of delivery.
The mounted protective ring is shown in Figure 2 for illustration purposes.
Other helpful accessories for the cable starter conversion such as Loctite, racing gloves, replacement cord, rubber mallet etc. can be found under accessories.
Exclusive product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Steel, Chrome steel (colloquially known as stainless steel) |
| Surface | galvanized (blue) |
| Number of fixing points | 3 pcs |
| Puch |
| Piaggio |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.10
EUR 2’510.00/l
Moped fans also bought
swiing® revival upright spring blue galvanized | Puch
Spring design: Tension spring · Ø wire: 2.5 mm · Manufacturer: swiing® revival parts · Length spring hook: 19 mm · Length spring hook: 53 mm · Material: Spring steel · Surface: galvanized (blue) · Total length: 122 mm · Ø inside: 9 mm · Ø outside: 14 mm
EUR 3.10
swiing® ingenious pull-wire starter PVL ignition | Puch E50
Ø outside: 130 mm · Total length: 170 mm · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Ignition system: PVL · Width: 150 mm · Height: 80 mm · Hole spacing: 138 mm · Number of fixing points: 2 pcs
EUR 172.00
swiing® ingenious pull starter Bosch / Ducati | Puch E50
Ø outside: 130 mm · Total length: 160 mm · Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Color: Chrome · Color: black-matt · Ignition system: BOSCH · Ignition system: DUCATI · Width: 150 mm · Height: 88 mm · Hole spacing: 137.5 mm · Number of fixing points: 2 pcs
EUR 172.00
swiing® revival stud bolt set M6 x 106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Total length: 106 mm · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.50
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Ø inside: 106 mm · Thickness: 1 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.50






