Engine mount 2.0 for Sachs 50/2, 50/3 and 50/4 engines. Revised version for a better fit of the engine.
The revised version can only be used in conjunction with the engine mount 2.0. Not suitable for the conventional engine mounts.
No more makeshift placement of wooden blocks during engine overhauls and tilting of the engine when tightening the screws.
We offer you an exclusive engine holder with which you can carry out revisions, tuning or other work on the engine conveniently and efficiently.
The mounting bracket can be rotated 360°. The holder is only fixed to one half of the housing. This means that gearbox revisions can be carried out in full.
Figure 1 shows the "Expert 2.0" engine stand with the engine mount. The scope of delivery corresponds to picture 3.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Area of application | Motor bracket |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL, AML 50/2 - L CH (0.8 PS), ML CH (0.8 PS), MB (2.6 PS), MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS), LKH (4.5 PS) |
Accessories & related products
Hot 
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Color: red · Color: white · Total length: 370 mm · Height: 340 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Hole spacing: 21.5 mm · Area of application: Motor bracket · Material thickness: 3.5 mm · Width: 245 mm
EUR 85.60
Moped fans also bought
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Width across flats Screw: 19 mm · Material: Steel · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Area of application: (Dis)assembly tool · Number of components: 1 pcs · Strength class: 8.8
EUR 11.30
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Width across flats (trigger): 8 mm · Width across flats (trigger): 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Diameter: 24 mm · Diameter: 40.3 mm · Total length: 120 mm · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Number of components: 1 pcs · Area of application: (Dis)assembly tool
EUR 50.20
GPO clutch trigger M27x1.25, M20x1 | Sachs 503, 50/2, 50/3, 50/4
Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Material: Steel · Surface: blackened · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Total length: 57 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool
EUR 22.70
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Ø inside: 64 mm · Ø outside: 75 mm · Thread type: M6x1 (standard thread) · Thread length: 40 mm · Number of components: 4 pcs · Height: 16 mm · Area of application: Special tool · Sachs OEM no.: 0276 057 000
EUR 34.20
Not in stock
swiing® revival puller clutch basket manual | Sachs
Thickness: 25 mm · Manufacturer: swiing® revival parts · Width across flats Screw: 19 mm · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Total length: 106 mm · Thread type: MF12x1.25 (fine pitch thread) · Number of components: 4 pcs · Area of application: (Dis)assembly tool
EUR 37.60
GPO piston pin extractor Ø 10, 12, 14 mm
Manufacturer: GPO · Material: Steel · Surface: burnished · Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Total length: 130 mm · Number of components: 7 pcs · Width across flats SW: 10 mm · Width across flats SW: 17 mm · Area of application: (Dis)assembly tool
EUR 22.70
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Thickness: 5 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Diameter: 19 mm · Ø inside: 27 mm · Ø outside: 93 mm · Total length: 290 mm · Number of components: 1 pcs · Ø Pin: 8 mm · Height: 80 mm · Area of application: Special tool
EUR 54.70
Hot
swiing® ingenious "Expert" motor stand
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: varnished · Color: red · Color: white · Total length: 370 mm · Height: 340 mm · Ø Receptacle: 25 mm · Ø Receptacle: 35 mm · Hole spacing: 21.5 mm · Area of application: Motor bracket · Material thickness: 3.5 mm · Width: 245 mm
EUR 85.60
Collection only possible with online purchase and appointment.
