Set
Hot 
World-class racing exhaust for your Puch Maxi S & N moped / moped with E50 engine and correspondingly large racing cylinder with exhaust outlet.
This is a thoroughbred racing muffler with an impressive resonance kick that delivers brute power directly to the rear wheel. The resonance pot dominates over the entire power band, pulls powerfully and showed noticeably more energy in endurance tests compared to comparable alternatives.
The racing wing is handmade from 0.8 mm thick material and leaves nothing to be desired in terms of performance, quality and accuracy of fit. The 3-point mounting of the muffler with additional reinforcement ensures stability and considerably reduces the risk of fatigue fracture. With a protective coating applied at the factory, the racing pot is ready for immediate installation.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | varnished |
| Ø Silencer | 60 mm |
| Exhaust type | Cone / double cone |
| Puch | E50 |
Accessories & related products
Parmakit 47 mm cylinder kit without head | Puch
Manufacturer: Parmakit · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Nominal diameter: 47 mm · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 46 mm · Ø cylinder neck: 49.5 mm · Ø outlet inside: 28 mm · Number of fixing points: 4 pcs · Inlet window: 29 x 16 · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 45 mm · Outlet type: slanted · Hole pattern [mm]: 44 x 44 · Thread outlet: M6x1 (standard thread) · Decompressor: No · Camouflaged: No
EUR 354.10
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Ø inside: 13.6 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Manufacturer: HK Clutches · Area of application: Racing · Material: Steel · Material addition: Aluminum · Thickness: 20.3 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs
EUR 354.10
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Manufacturer: Gilardoni italkit · Material: Aluminum · Area of application: Tuning · Surface: sandblasted · Nominal diameter: 47 mm · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø piston pin (B): 12 mm · Hole spacing inlet: 35.5 mm · Ø cylinder neck: 51 mm · Hole spacing inlet: 60 mm · Ø Inlet inside: 18.3 mm · Ø outlet inside: 26.5 mm · Number of fixing points: 4 pcs · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Hole spacing outlet: 42 mm · Outlet type: slanted · Hole pattern [mm]: 44 x 44 · Thread outlet: M6x1 (standard thread) · Decompressor: No · Camouflaged: No
EUR 239.80
PVL internal rotor ignition clockwise without keyway
Manufacturer: PVL · Material: Aluminum · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Direction of rotation: right · Ø mounting plate: 90 mm · Mounting type: Screws · Number of fixing points: 3 pcs
EUR 285.60
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Area of application: High End · Area of application: Racing · Area of application: Tuning · Light coil voltage: 12 V · Direction of rotation: any · Ø mounting plate: 90 mm · Ø Internal flywheel: 63.5 mm · Mounting type: Screws · Tension: 12 V · Ø Flywheel outside: 75 mm · Number of fixing points: 3 pcs · Performance: 60 W
EUR 285.60
Polini CP 23 mm carburetor (hand choke)
Width: 66 mm · Height: 136 mm · Manufacturer: Polini · Material: Aluminum · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Nominal diameter: 23 mm · Carburetor type: CP · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mounting type: Plug connection clamped · Nozzle size: 110 · Ø Inside entrance: 23 mm · Ø Output inside: 23 mm · Ø Air filter connection: 46 mm · Total length: 71.3 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Camouflaged: No · Size of secondary nozzle: 40
EUR 171.30
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Nipple length: 5 mm
EUR 2.75
VOCA silencer black with 3-point mount
Ø inside: 20.3 mm · Manufacturer: VOCA · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Surface: anodized · Color: black · Ø Silencer: 60.8 mm · Number of fixing points: 3 pcs · Ø bolt circle: 46 mm · Total length: 220 mm · Total length: 235 mm
EUR 102.70
VOCA silencer red with 3-point mount
Ø inside: 20.3 mm · Manufacturer: VOCA · Thread type: M6x1 (standard thread) · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Surface: anodized · Color: black · Color: red · Ø Silencer: 60.8 mm · Number of fixing points: 3 pcs · Ø bolt circle: 46 mm · Total length: 220 mm
EUR 102.70
Collection only possible with online purchase and appointment.
