
Set of galvanized M6 threaded bolts and flange nuts with increased strength for the intake, exhaust or cylinder base mounting of various mopeds, mopeds and small motorcycles (Puch, Sachs, Zündapp, etc.).
.These extended stud bolts can also be used when fitting a lift plate. The original cylinder stud bolts are usually too short.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Thread type | M6x1 (standard thread) |
| Total length | 38 mm |
| Drive | External hexagon |
| Width across flats | 10 mm |
| Nominal diameter (thread) | 6 mm |
| Strength class | 10.9, 8 |
| Thread length | 20 mm, 12 mm |
Accessories & related products
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Total length: 30 mm · Diameter: 5.95 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Strength class: 10.9 · Thread type: M6x1 (standard thread)
EUR 2.05
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Area of application: Chemistry · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.10
EUR 2’510.00/l
swiing® revival stud bolt M6x38 inlet/outlet galvanized (10.9 strength)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Total length: 38 mm · Diameter: 5.9 mm · Nominal diameter (thread): 6 mm · Strength class: 10.9 · Thread length: 11 mm · Thread length: 19 mm
EUR 2.30
swiing® ingenious Stud Bolt Set M6 / M5 (Grade 12.9) Cylinder | Sachs 50/2, 503, 50/3, 50/4
Diameter: 6 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 5 mm · Nominal diameter (thread): 6 mm · Drive: External hexagon · Total length: 27.3 mm · Width across flats: 8 mm · Thread length: 9.5 mm · Thread length: 14 mm · Strength class: 10 · Strength class: 12.9
EUR 22.10
Moped fans also bought
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Number of components: 1 pcs · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm
EUR 2.75
Magura Gas/Deco Cable Clamp, Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm · Thread length: 4 mm
EUR 2.30
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift
EUR 13.20
EUR 29.33/l
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Thread type: M6x1 (standard thread) · Drive: External hexagon · Total length: 106 mm · Nominal diameter (thread): 6 mm · Width across flats: 10 mm · Thread length: 13 mm · Thread length: 18.5 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.50
swiing® revival stud bolt set M6x30 (10.9 strength) galvanized
Diameter: 6 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Drive: External hexagon · Total length: 30 mm · Width across flats: 10 mm · Thread length: 12 mm · Strength class: 8 · Strength class: 10.9
EUR 12.30








