Extension for the fuel dabber on Bing carburetors.
Fits Bing SSN, SSE, SRF, 85, SRA, SSB and many more.
Depending on the shape of the dabber, the extension must be fixed with a little glue, which you can find in the accessories section.
Swab extension length: 69 mm
Ø inside: 8.3 (slightly tapered)
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Plastic |
| Component group Carburetor | Adjusting screws, float, etc. |
| Color | black |
| Ø inside | 8.3 mm |
| Carburetor type | SRE, SRF, SSN, SSE, SRA (1/11/35) Velux, SRA (1/11/31) Velux, SSB, SLA |
| Total length | 69 mm |
| Puch | E50 ZA50 (air-cooled) ZA50 (fan-cooled) Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
| Sachs | 50 (Fahrtwind, 1.25 / 1.5 hp, DE) 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 503 - AAL , ABL , 2AL / 2BL , AB , AC 504 (without pedal shaft) 505 (with pedal shaft) - 1A (AT) , 2A (HG) 508 - 1 A 535 |
| Zündapp Belmondo | |
| ILO / JLO | |
| Kreidler | Flory MF / MP |
Accessories & related products
swiing® revival swabs short Bing SRE, SSN, SSE, SRF, 85, SRA
Manufacturer: swiing® revival parts · Component group Carburetor: Adjusting screws, float, etc. · Ø inside: 2.5 mm · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSE · Carburetor type: SSN · Ø outside: 8 mm · Carburetor type: 85 · Total length: 25 mm · Sachs OEM no.: 0281 109 000 · Pony OEM number: A2430
EUR 4.50
swiing® revival choke extension Bing carburetor
Manufacturer: swiing® revival parts · Material: Plastic · Component group Carburetor: Choke control · Ø inside: 3.25 mm · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSN · Ø outside: 6 mm · Ø outside: 8 mm · Choke control: Hand choke · Total length: 50 mm
EUR 6.75
Loctite superglue 3 g (401)
Manufacturer: Loctite · Material to be used: porous materials · Color: transparent · Contents: 3 g · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Temperature resistance (min.): -40 - 140 °C · Type of application: 1K · Alignment time: 5 sec · Area of application: Chemistry
EUR 16.00
EUR 5’333.33/kg
Dab long Bing SRE, SSN, SSE, SRF, 85, SRA
Material: Plastic · Material: Steel · Component group Carburetor: Adjusting screws, float, etc. · Color: white · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSE · Carburetor type: SSN · Ø outside: 6 mm · Ø outside: 8 mm · Carburetor type: 85 · Ø Passage: 2.5 mm · Total length: 25 mm · Total length: 40 mm
EUR 4.35
Moped fans also bought
swiing® revival start slide Bing SRE
Manufacturer: swiing® revival parts · Material: Steel · Component group Carburetor: Choke control · Surface: galvanized (blue) · Carburetor type: SRE · Choke control: Hand choke · Total length: 23.5 mm · Width: 16 mm · Height: 12.5 mm · Alternative version of the Pony OEM number: A4599 · Alternative version of the Sachs OEM number: 0962 089 000
EUR 5.15
Hot 
swiing® revival Stud Bolt, Inlet/Outlet M6x30 (Grade 10.9)
Manufacturer: swiing® revival parts · Material: Steel · Diameter: 5.95 mm · Surface: galvanized (blue) · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Strength class: 10.9
EUR 2.05
Hot
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Ø nipple: 3 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Nipple shape: Cylinder · Nipple length: 5 mm · Area of application: Standard
EUR 2.75
swiing® revival seal Float SRE, SRC, SRF, SRA
Ø inside: 41 mm · Ø outside: 45 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Thickness: 1.5 mm · Pony OEM number: A4519 · Sachs OEM no.: 0950 128 000
EUR 3.20
Hot
GPO gasket set carburetor Bing SRE
Manufacturer: GPO · Camouflaged: No · Material: Sealing paper · Component group Carburetor: Sealing, revising · Ø inside: 7.8 mm · Ø inside: 41 mm · Carburetor type: SRE · Ø outside: 12.2 mm · Ø outside: 45 mm · Thickness: 0.5 mm · Thickness: 0.9 mm · Thickness: 1.5 mm
EUR 5.60
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Width: 50 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Total length: 66 mm · Ø Output inside: 15 mm · Height: 95 mm · Ø Air filter connection: 20 mm · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 91.70
swiing® revival choke extension Bing carburetor
Manufacturer: swiing® revival parts · Material: Plastic · Component group Carburetor: Choke control · Ø inside: 3.25 mm · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSN · Ø outside: 6 mm · Ø outside: 8 mm · Choke control: Hand choke · Total length: 50 mm
EUR 6.75
Working late? Evening hours on Thursday until 20:00
