Hot 
Fan-cooled 41 mm S3 (55 cc) racing kit suitable for your moped or small motorcycle with a Sachs 50/2 (DE) or 50/3 engine.
This tuning cylinder is a clear statement for anyone who wants real performance. Meticulously handcrafted by Tivedens Motor, this cylinder delivers uncompromising torque, crisp throttle response, and a riding experience that immediately impresses. Each individual cylinder is numbered and crafted with extensive experience, technical expertise, and a genuine passion for performance. Depending on the setup used, the manufacturer claims it can deliver 6.9–7.3 hp.
A racing cylinder for anyone who doesn’t want to spend time comparing options, but is looking for a part that works, delivers performance, and is simply fun. Install it, ride it, smile.
Scope of delivery as shown in Image 1.
Note: The cylinder is equipped with a large square intake port for a 17 mm carburetor and a large M40 exhaust thread. Please take this into account when selecting your additional components. Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find the matching cylinder head, mounting hardware, exhaust systems, and threadlocker in the accessories section.
Quality product from the Swedish manufacturer Tivedens Motor AB
| Nominal diameter | 41 mm |
| Manufacturer | Tivedens Motor AB |
| Material | Gray cast iron |
| Displacement | 55 ccm |
| Crankshaft stroke | 42 mm |
| Ø cylinder neck | 44 mm |
| Number of fixing points | 4 pcs |
| Surface | varnished |
| Ø Outlet outside | 40 mm |
| Ø outlet inside | 29.5 mm |
| Hole spacing inlet | 31 mm |
| Inlet window | 17 x 15 mm |
| Ø piston pin (B) | 12 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Outlet type | Union nut |
| Thread outlet | MF40x1.5 (fine pitch thread) |
| Area of application | Tuning |
| Sachs | 50/2 50/3 50/4 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Area of application: Chemistry · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.10
EUR 2’510.00/l
swiing® revival Stud Bolt M5x23 Inlet (Diaphragm) 10.9 | Sachs 50/2 (A3700)
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Steel · Diameter: 4.9 mm · Nominal diameter (thread): 5 mm · Surface: galvanized (blue) · Total length: 23 mm · Thread type: M5x0.8 (standard thread) · Thread length: 6 mm · Thread length: 12 mm · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2.05
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats: 10 mm · Shank: Yes · Ø shaft: 5.85 mm · Shank length: 8 mm · Total length: 34 mm · Thread length: 22 mm · Strength class: 10.9 · Color: silver · Number of components: 12 pcs
EUR 5.60
Exhaust set Sidepipe Ø 32 / 60 mm chrome | Sachs 50/2
Manufacturer: Made in Portugal · Material: Steel · Ø outside: 60 mm · Total length: 600 mm · Ø Internal connection: 32 mm · Ø Flame tube outside: 32 mm · Exhaust type: Sidepipe · Mounting type: Screwed clamp · Flame tube attachment: Flange
EUR 194.90
swiing® revival carburetor 17 mm Bing SSB 1/17/69
Width: 85 mm · Height: 100 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Area of application: Standard · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SSB · Total length: 132 mm · Nominal diameter: 17 mm · Hole spacing inlet: 31 mm · Ø fuel hose connection: 6 mm · Nozzle size: 76 · Mounting type: Flange · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke
EUR 145.60
swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Width: 95 mm · Height: 50 mm · Ø cylinder: 41 mm · Ø outside: 98 mm · Hole pattern [mm]: 37 x 37 · Candle thread: long · Number of fixing points: 4 pcs · Total length: 127 mm · Decompressor: M10x1.5 · Area of application: Standard · Ø screw holder: 19 mm
EUR 78.60
swiing® ingenious exhaust nut M40x1.5 long 32 mm manifold | Sachs
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Nut type: Union nut · Thread type: MF40x1.5 (fine pitch thread) · Nominal diameter (thread): 40 mm · Ø inside: 32.5 mm · Ø outside: 45 mm · Height: 22 mm
EUR 24.90
BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Aluminum · Ø cylinder: 41 - 43 mm · Ø outside: 108 mm · Ø screw holder: 19.3 mm · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Decompressor: M10x1.5 · Area of application: Tuning
EUR 172.00
Hot
Tivedens engine 41 mm cylinder kit S3 | Sachs 50/2 (DE), 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Surface: varnished · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Area of application: Tuning
EUR 332.60
Hot
Tivedens engine 41 mm cylinder kit S4 | Sachs 50/2 (DE), 50/3, 50/4
Nominal diameter: 41 mm · Manufacturer: Barikite · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Displacement: 55 ccm · Crankshaft stroke: 42 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 18 mm · Ø outlet inside: 30 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Hole spacing inlet: 31 mm · Ø piston pin (B): 12 mm · Outlet type: Union nut · Thread outlet: MF36x1.5 (fine pitch thread) · Number of fixing points: 4 pcs · Area of application: Tuning
EUR 367.00
Explore categories from Cylinder
Moped fans also bought
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Bearing type: Shoulder bearing · Stock number: E15 · Ø inside: 15 mm · Ø outside: 35 mm · Width: 8 mm · Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Material: Brass · Material: Steel · Area of application: Standard · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
EUR 28.60
swiing® revival exhaust nut M40x1.5 for 32 mm pipe, galvanized | Sachs
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Union nut · Thread type: MF40x1.5 (fine pitch thread) · Nominal diameter (thread): 40 mm · Ø inside: 33.5 mm · Ø outside: 46 mm · Height: 19 mm
EUR 16.00
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Drive: External hexagon · Screw head: Hexagon · Width across flats: 10 mm · Shank: Yes · Ø shaft: 5.85 mm · Shank length: 8 mm · Total length: 34 mm · Thread length: 22 mm · Strength class: 10.9 · Color: silver · Number of components: 12 pcs
EUR 5.60
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Ø inside: 86 mm · Manufacturer: swiing® revival parts · Material: Sealing paper · Width: 170 mm · Number of components: 1 pcs · Total length: 250 mm · Thickness: 0.4 mm · Number of fixing points: 16 pcs · Color: sand-colored · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
EUR 6.75
swiing® revival carburetor 17 mm Bing SSB 1/17/69
Width: 85 mm · Height: 100 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Area of application: Standard · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SSB · Total length: 132 mm · Nominal diameter: 17 mm · Hole spacing inlet: 31 mm · Ø fuel hose connection: 6 mm · Nozzle size: 76 · Mounting type: Flange · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke
EUR 145.60
swiing® ingenious gasket cylinder head 41 mm | Sachs 503, 502, 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Nominal diameter: 41 mm · Ø inside: 41.7 mm · Thickness: 0.3 mm · Ø cylinder: 41 mm · Place of use: Cylinder head · Hole pattern [mm]: 37 x 37 · Area of application: Standard
EUR 5.60
swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: sandblasted · Width: 95 mm · Height: 50 mm · Ø cylinder: 41 mm · Ø outside: 98 mm · Hole pattern [mm]: 37 x 37 · Candle thread: long · Number of fixing points: 4 pcs · Total length: 127 mm · Decompressor: M10x1.5 · Area of application: Standard · Ø screw holder: 19 mm
EUR 78.60
Working late? Evening hours on Thursday until 20:00
