Cylinder cover with 39 mm combustion chamber diameter for blown cylinders of Puch X30 NG-2AH, Puch X30 NG-2A, Puch X30 N-2A, Puch DS 50, Puch MV 50, Puch MC 50, etc.
Attention: For use on Velux engines that have M7 stud bolts, the four holes must be drilled out slightly. Alternatively, you can find cylinder heads in the accessories section where the holes are already enlarged.
A good replica of the original CH model with small cooling fins, which is cooled by a fan wheel (fan).
This cylinder head does not have a mount for fitting a decompressor.
Dimension (Ø×H): 90 × 3.5 cm
Ø Stud bolt length: 6.4 mm
Original Puch spare part number: 350.1.10.201.8
| Material | Aluminum |
| Area of application | Standard |
| Ø cylinder | 38 mm |
| Ø outside | 90 mm |
| Height | 35 mm |
| Number of fixing points | 4 pcs |
| Ø screw holder | 6.4 mm |
| Hole pattern [mm] | 44 x 44 |
| Candle thread | short |
| Decompressor | No |
| Puch | ZA50 (fan-cooled) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
swiing® revival stud bolt M6x106 (10.9 strength class)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Thread length: 20 mm · Puch OEM number: 360.1.10.034.1
EUR 2.05
swiing® revival Stud Bolt Set M6x106 | Puch
Diameter: 5.9 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Nominal diameter (thread): 6 mm · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.50
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø outlet inside: 22 mm · Ø cylinder: 38 mm · Area of application: Standard · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 10.20
Explore categories from Cylinder
Moped fans also bought
Meteor piston 38 mm #1 | Puch
Manufacturer: Meteor · Ø outside piston (A): 37.95 mm · Compression height (C): 22.7 mm · Curvature (D): 3.3 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Piston ring height: 2 mm · Tolerance group: 1 · Weight piston kit: 79 g · Puch OEM number: 349.1.10.106.0/21
EUR 57.30
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Ø outlet inside: 22 mm · Ø cylinder: 38 mm · Area of application: Standard · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Number of components: 4 pcs · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 10.20
Piston 38 mm (12 mm KoBo) short shirt | Puch fan-cooled
Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.9 mm · Curvature (D): 3.2 mm · Total piston height (E): 50.1 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Nominal diameter: 38 mm · Piston ring height: 2 mm · Weight piston kit: 74 g
EUR 45.80
GPO 38 mm Original Cylinder, Fan-Cooled, 12 mm KoBo | Puch X30 Velux, NG-2AH, NG-2A
Manufacturer: GPO · Material: Gray cast iron · Camouflaged: No · Surface: sandblasted · Area of application: Standard · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Ø piston pin (B): 12 mm · Nominal diameter: 38 mm · Hole spacing inlet: 32 mm · Number of fixing points: 4 pcs · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44
EUR 143.30
EUR 128.40
GPO Piston 38 mm No. 2 | Puch
Manufacturer: GPO · Ø outside piston (A): 37.96 mm · Compression height (C): 22.7 mm · Curvature (D): 3.3 mm · Total piston height (E): 55 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Ø piston pin (B): 12 mm · Tolerance group: 2 · Weight piston kit: 79 g
EUR 38.90
GPO 38 mm Cylinder Kit, Fan-Cooled, 12 mm KoBo | Puch Velux, NG-2AH
Nominal diameter: 38 mm · Manufacturer: GPO · Material: Gray cast iron · Surface: sandblasted · Area of application: Tuning · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 32 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 97.40
swiing® revival stud bolt set M6x30 (10.9 strength) galvanized
Diameter: 6 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Nominal diameter (thread): 6 mm · Total length: 30 mm · Thread length: 12 mm · Thread type: M6x1 (standard thread) · Strength class: 8 · Width across flats: 10 mm · Strength class: 10.9
EUR 12.30
Working late? Evening hours on Thursday until 20:00
