
Fan-cooled 38 mm cylinder kit with a 12 mm piston pin. This reproduction cylinder is equipped with a seal, which is why it can be used as an original cylinder.
Compatible with Puch X30 Velux and Puch X30 NG-2AH / NG-2A mopeds.
Note: Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
Caution: For Velux engines, the small slot at the sealing surface must be filled with casting material to ensure the cylinder kit is airtight.
We recommend using Wekem 2K liquid metal, which can be found in the accessories section.
A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
Camouflaged: No · Manufacturer: GPO · Material: Gray cast iron · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Hole spacing inlet: 32 mm · Hole spacing outlet: 42 mm · Hole spacing for cylinder mounting: 44 mm · Outlet type: straight · Number of fixing points: 4 pcs · Area of application: Standard · Nominal diameter: 38 mm
Nominal diameter: 38 mm · Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.9 mm · Curvature (D): 3.2 mm · Total piston height (E): 50.1 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Weight piston kit: 74 g
| Manufacturer | GPO |
| Material | Gray cast iron |
| Camouflaged | No |
| Area of application | Standard |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Crankshaft stroke | 43 mm |
| Hole spacing inlet | 32 mm |
| Number of fixing points | 4 pcs |
| Nominal diameter | 38 mm |
| Hole spacing outlet | 42 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole pattern [mm] | 44 x 44 |
| Ø piston pin (B) | 12 mm |
| Outlet type | straight |
| Thread outlet | M6x1 (standard thread) |
| Puch | Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
swiing® revival stud bolt M6x106 (10.9 strength class)
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Total length: 106 mm · Nominal diameter (thread): 6 mm · Thread type: M6x1 (standard thread) · Thread length: 12 mm · Thread length: 20 mm · Puch OEM number: 360.1.10.034.1
EUR 2.05
38 mm cylinder head, fan-cooled | Puch X30 NG-2AH, NG-2A, N-2A, DS, MV
Height: 35 mm · Ø outside: 90 mm · Material: Aluminum · Area of application: Standard · Ø cylinder: 38 mm · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No · Ø screw holder: 6.4 mm · Hole pattern [mm]: 44 x 44
EUR 45.80
WEKEM 2K Liquid Metal 24 ml
Manufacturer: WEKEM · Material to be used: Aluminum · Material to be used: Ceramics · Material to be used: Metal · Material to be used: Steel · Material to be used: Wood · Contents: 24 ml · Color: gray · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Type of application: 2K · Alignment time: 240 sec · Area of application: Chemistry · Temperature resistance (min.): -20 - 80 °C
EUR 22.80
EUR 456.00/kg
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Area of application: Standard · Ø cylinder: 38 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 10.20
Piston 38 mm (12 mm KoBo) short shirt | Puch fan-cooled
Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.9 mm · Curvature (D): 3.2 mm · Total piston height (E): 50.1 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Weight piston kit: 74 g
EUR 45.80
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing type: Needle roller and cage assembly · Bearing cage: Silver cage · Dimension needle bearing: 12/15 x 14.2 · Manufacturer: swiing® ingenious parts · Width: 14.2 mm · Ø inside: 12 mm · Ø outside: 15 mm · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
EUR 13.70
Explore categories from Cylinder
Moped fans also bought
Wheel axle set M12x1 x 165 front
Manufacturer: Quenching · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Ø outside: 17.4 mm · Ø outside: 19.9 mm · Width: 7 mm · Width: 10.2 mm · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Width: 32 mm · Thread type: MF12x1 (fine pitch thread) · Height: 9.9 mm · Total length: 165 mm · Ø shaft: 11.9 mm · Shank length: 114 mm · Width across flats: 19 mm · Thread length: 25 mm · Thread length: 26 mm
EUR 16.90
EUR 11.40
38 mm cylinder head, fan-cooled | Puch X30 NG-2AH, NG-2A, N-2A, DS, MV
Height: 35 mm · Ø outside: 90 mm · Material: Aluminum · Area of application: Standard · Ø cylinder: 38 mm · Candle thread: short · Number of fixing points: 4 pcs · Decompressor: No · Ø screw holder: 6.4 mm · Hole pattern [mm]: 44 x 44
EUR 45.80
GPO piston 40 mm (12 mm KoBo) | Puch X30 Velux fan-cooled
Manufacturer: GPO · Ø outside piston (A): 39.94 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.5 mm · Curvature (D): 3.4 mm · Total piston height (E): 52.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: L-ring · Piston ring mold: Rectangular ring · Nominal diameter: 40 mm · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Piston ring height: 2 mm · Weight piston kit: 89 g
EUR 40.00
WEKEM 2K Liquid Metal 24 ml
Manufacturer: WEKEM · Material to be used: Aluminum · Material to be used: Ceramics · Material to be used: Metal · Material to be used: Steel · Material to be used: Wood · Contents: 24 ml · Color: gray · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: Toxic to aquatic organisms (with long-term effects) · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Type of application: 2K · Alignment time: 240 sec · Area of application: Chemistry · Temperature resistance (min.): -20 - 80 °C
EUR 22.80
EUR 456.00/kg
GPO cylinder 38 mm fan-cooled with seal | Puch X30 Velux, NG-2AH
Manufacturer: GPO · Number of fixing points: 4 pcs · Material: Gray cast iron · Camouflaged: No · Crankshaft stroke: 43 mm · Displacement: 50 ccm · Nominal diameter: 38 mm · Hole spacing outlet: 42 mm · Hole spacing for cylinder mounting: 44 mm · Outlet type: straight · Hole spacing inlet: 32 mm · Area of application: Standard
EUR 114.60
GPO gasket set 38 mm cylinder fan-cooled | Puch X30 NG-2AH, Velux
Manufacturer: GPO · Area of application: Standard · Ø cylinder: 38 mm · Number of components: 4 pcs · Hole spacing inlet: 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 10.20
Piston 38 mm (12 mm KoBo) short shirt | Puch fan-cooled
Ø outside piston (A): 37.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 22.9 mm · Curvature (D): 3.2 mm · Total piston height (E): 50.1 mm · Number of piston rings (F): 2 pcs · Nominal diameter: 38 mm · Piston ring mold: Rectangular ring · Piston ring impact: Flank safety device (FS) · Piston ring height: 2 mm · Weight piston kit: 74 g
EUR 45.80













