Original reproduction cylinder kit for Puch Supermaxi LG1 / LG2 mopeds. This cylinder also fits Puch Maxi or Puch X30 mopeds, as it is equipped with smaller exhaust ports. In this case, however, the corresponding exhaust with a narrow outlet must be fitted.
The seal is included separately in the scope of delivery. This can be omitted if necessary to give the cylinder a little more power.
The piston has two piston rings.
You can find suitable attachments in the accessories section.
Attention: The stud bolt distance on the intake side is only 32 mm. On the original cylinder, this is 38 mm. The holes on the intake manifold must therefore be widened slightly in order to be able to fit it.
| Material | Gray cast iron |
| Surface | sandblasted |
| Displacement | 50 ccm |
| Area of application | Standard |
| Crankshaft stroke | 43 mm |
| Hole spacing inlet | 32 mm |
| Nominal diameter | 38 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing outlet | 42 mm |
| Hole pattern [mm] | 44 x 44 |
| Ø piston pin (B) | 12 mm |
| Outlet type | slanted |
| Number of fixing points | 4 pcs |
| Thread outlet | M6x1 (standard thread) |
| Camouflaged | Yes |
| Puch | E50 ZA50 (air-cooled) Z50 (X30 Sport) |
Accessories & related products
GPO gasket set cylinder original | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Number of components: 4 pcs · Ø cylinder: 38 mm · Ø outlet inside: 22 mm · Area of application: Standard · Thickness: 0.3 mm · Thickness: 0.4 mm · Thickness: 1.8 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes
EUR 8.45
swiing® ingenious needle roller bearing 12/15/14.2 original silver cage
Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Bearing type: Needle roller and cage assembly · Ø inside: 12 mm · Width: 14.2 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 14.2 · Alternative version of the Pony OEM number: A4222 · Alternative version of the Sachs OEM number: 0232 157 001 · Tomos OEM number: 035548
EUR 13.60
Moped fans also bought
swiing® revival Bing float needle (with penetration) SRE, SRC, SRF, SRA, 85, 18
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Rubber · Component group Carburetor: Adjusting screws, float, etc. · Color: black · Surface: blank · Color: silver · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: 18 Catalyst · Carburetor type: 85 · Width: 3.3 mm · Total length: 12 mm · Ø outside: 2.6 mm · Ø outside: 4 mm · Alternative version of the Pony OEM number: A4595A · Alternative version of the Sachs OEM number: Bing 47-032
EUR 7.90
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.10
GPO chain tensioner | Puch Maxi S
Manufacturer: GPO · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Number of teeth: 10 pcs · Thread type: M6x1 (standard thread) · Number of fixing points: 1 pcs · Color: black · Color: silver · Ø outside sprocket: 36 mm · Total length: 175 mm
EUR 11.30
Heidenau 2.25 x 17" tires M4 Allround
Manufacturer: Heidenau · Tire width [inch]: 2.25 " · Color: black · Wheel size [inch]: 17 " · Width [inch]: 2 1/4 · Speed index: B = 50 km/h · Load capacity index: 28 = 100 kg · Profile type: M4 · Tire type: Allround · Old designation: 21 x 2.25 · White wall: No · Tubeless (yes/no): Tubetype TT (requires hose)
EUR 50.20
swiing® revival gasket set cylinder | Puch Supermaxi LG1, LG2 (Cat)
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Number of components: 4 pcs · Ø cylinder: 38 mm · Hole spacing inlet: 32 - 38 mm · Ø outlet inside: 22 mm · Hole spacing outlet: 42 - 44 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: No · Area of application: Standard
EUR 12.50
Collection only possible with online purchase and appointment.
