38 mm tuning cylinder with 50 cc displacement and narrow exhaust for your Pony moped / moped with Sachs 503 AB, AC or ADV engine.
The wide-bore racing kit has been heavily reworked compared to the original cylinder. The overflow ducts, the intake and exhaust have been enlarged. There is hardly any visible difference from the outside. In terms of performance, the racing cylinder is designed for the upper engine speeds. Due to the long exhaust timing, a high back pressure is required to exploit the power.
In addition to the piston, piston ring, clips and bolts, the scope of delivery also includes the required gaskets for the base, intake and exhaust. In addition, an O-ring and a reinforced graphite gasket for the cylinder cover are included, which can be used as required. It is still possible to use the original cylinder head.
Cylinder material: Cast aluminum
Piston material: Cast aluminum
Bore: 38 mm
Capacity: 49.90 cm³
Ø Cylinder neck: 52 / 50.5 mm
Exhaust inside: 19.5 x 11 mm
Ø Exhaust inside: 29 mm
Exhaust thread: M6 x 1
Hole spacing exhaust: 50.5 mm
Hole spacing inlet: 36 mm
Inlet thread: M6 x 1
Ø inlet inside: 23.5 mm
Hole pattern: 56 x 56 mm
Ø stud bolt hole: 6.9 mm
Piston pin: 12 mm
Decompressor hole: yes, MF12x1.25 mm
Note: The inlet of the cylinder has a double hole pattern, so that sockets for both the AB / AC and the ADV engine can be fitted.
The narrow outlet is designed for AB / AC exhausts. A flame tube from the AB / AC engine must therefore also be fitted to the ADV engine.
Matching attachments for the cylinder set can be found in the accessories section.
Alternative to the original Pony spare part number: A2868
Branded product from the manufacturer AKOA.
Details
| Manufacturer | AKOA |
| Material | Aluminum |
| Area of application | Performance |
| Surface | varnished, Nickel silicon carbide (known as Nikasil®) |
| Displacement | 50 ccm |
| Nominal diameter | 38 mm |
| Crankshaft stroke | 44 mm |
| Ø piston pin (B) | 12 mm |
| Ø cylinder neck | 52 mm, 50.5 mm |
| Ø outlet inside | 29 mm |
| Ø Inlet inside | 23.5 mm |
| Thread inlet | M6x1 (standard thread) |
| Hole spacing inlet | 36 mm |
| Decompressor | MF12x1.25 |
| Hole spacing outlet | 50.5 mm |
| Outlet type | slanted |
| Thread outlet | M6x1 (standard thread) |
| Hole pattern [mm] | 56 x 56 |
| Alternative version of the Pony OEM number | A2868 |
Suitable for the following models
| Sachs | 503 - AB, AC, ADV |
Accessories & related products
swiing® revival gasket set | Sachs 503 AB, AC wide wall
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Copper · Material: Rubber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 21 pcs · Ø outlet inside: 24 mm · Hole spacing outlet: 38.5 mm · Hole pattern [mm]: 56 x 56
EUR 51.40
swiing® revival gasket set | Sachs 503 ADV wide wall Cat.
Manufacturer: swiing® revival parts · Area of application: Standard · Material: Copper · Material: Fiber · Material: Rubber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 23.3 mm · Hole spacing inlet: 38 mm · Number of components: 15 pcs · Hole pattern [mm]: 56 x 56 · Decompressor: No
EUR 51.40
AKOA wide wall 38 mm cylinder kit original | Sachs 503 AB, AC, ADV (A2868)
Manufacturer: AKOA · Material: Aluminum · Displacement: 50 ccm · Surface: Nickel silicon carbide (known as Nikasil®) · Surface: varnished · Crankshaft stroke: 44 mm · Nominal diameter: 38 mm · Ø cylinder neck: 50.5 mm · Ø cylinder neck: 52 mm · Ø Outlet outside: 23 mm · Ø outlet inside: 11 mm · Ø outlet inside: 19.5 mm · Inlet window: 18x7 mm · Thread inlet: M6x1 (standard thread) · Area of application: Standard · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 50.5 mm · Thread outlet: M6x1 (standard thread) · Decompressor: MF12x1.25 · Hole spacing inlet: 36 mm · Pony OEM number: A2868
EUR 343.30
AKOA intake manifold 15 mm SRE | Sachs 503 AB, ADV (A5669, A2180)
Ø inside: 15 mm · Manufacturer: AKOA · Material: Aluminum · Mounting type: Screws · Ø External connection: 20 mm · Hole spacing inlet: 36 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669
EUR 57.10
AKOA intake manifold 20 mm PHBG / CP | Sachs 503 AB, ADV (A5669, A2180)
Ø inside: 20 mm · Manufacturer: AKOA · Material: Aluminum · Mounting type: Screws · Ø External connection: 24 mm · Hole spacing inlet: 36 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669
EUR 57.10
AKOA wide wall 45 mm cylinder kit | Sachs 503 AB, AC, ADV
Manufacturer: AKOA · Material: Aluminum · Displacement: 70 ccm · Surface: Nickel silicon carbide (known as Nikasil®) · Surface: varnished · Crankshaft stroke: 44 mm · Nominal diameter: 45 mm · Ø cylinder neck: 50.5 mm · Ø cylinder neck: 52 mm · Ø outlet inside: 29 mm · Ø Inlet inside: 23.5 mm · Thread inlet: M6x1 (standard thread) · Area of application: Tuning · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 50.5 mm · Thread outlet: M6x1 (standard thread) · Decompressor: MF12x1.25 · Hole spacing inlet: 36 mm · Alternative version of the Pony OEM number: A2868
EUR 343.30
AKOA decompressor M12x1.25 wide wall | Sachs 503 AB, AC, ADV (A2942)
Manufacturer: AKOA · Material: Steel · Surface: galvanized (blue) · Thread length: 8 mm · Total length: 66 mm · Width across flats SW: 15 mm · Area of application: Standard · Thread type: MF12x1.25 (fine pitch thread) · Pony OEM number: A2942
EUR 91.50
swiing® ingenious gasket outlet Ø 23 mm graphite | Sachs 503 AB, AC
Manufacturer: swiing® ingenious parts · Ø inside: 23 mm · Material: Graphite / Graphite · Place of use: Outlet · Material: Steel · Color: gray · Thickness: 2 mm · Number of fixing points: 2 pcs · Hole spacing: 48.5 - 51.5 mm
EUR 10.20
Moped fans like you also bought:
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Beta 521
Width across flats (trigger): 27 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Total length: 55 mm · Total length: 75 mm · Width across flats Screw: 19 mm · Strength class: 8.8 · Number of components: 1 pcs
EUR 10.20
EUR 11.30
swiing nozzle set M3.5 (54 - 64) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 54 · Nozzle size: 56 · Nozzle size: 58 · Nozzle size: 60 · Nozzle size: 62 · Nozzle size: 64 · Total length: 6 mm
EUR 18.20
Flame tube 22 mm | Sachs 503 AB (with guide bush)
Ø inside: 20 mm · Ø inside: 26 mm · Ø outside: 22 mm · Ø outside: 28 mm · Manufacturer: Made in Portugal · Material: Steel · Color: Chrome · Surface: chrome-plated · Total length: 440 mm · Number of fixing points: 2 pcs · Hole spacing outlet: 50 mm · Flame tube attachment: Stud bolts & nuts
EUR 34.20
Jasil crankshaft | Sachs 503 AC / ADV (A3337 / A2904)
Manufacturer: Jasil · Area of application: Standard · Material: Steel · Cheek type: standard · Thread type: MF10x1 (fine pitch thread) · Crankshaft stroke: 44 mm · Thread length: 7 mm · Thread length: 11 mm · Connecting rod length center-center: 86 mm · Number of gears: 2 pcs · Total length of crankpin on clutch side: 97 mm · Total length crankpin ignition side: 62 mm · Ø crank webs: 83 mm · Ø Connecting rod eye: 15 mm · Ø piston pin (B): 12 mm · Ø Bearing seat (clutch side): 12 mm · Weight: 964 g · Ø Bearing seat (ignition side): 15 mm · Dimension needle bearing: 12 / 15 x 12.8 mm (axe 12) · Wide crank webs: 34.2 mm · Length 1st paragraph: 9.4 mm · Length 2nd paragraph: 19.4 mm · Length 3rd paragraph: 74 mm · Ø 1st step (on the coupling side): 17 mm · Ø 2nd shoulder (on the clutch side): 12 mm · Ø 3rd step (on the clutch side): 11.6 mm · Length of shoulder (ignition side): 32 mm
EUR 228.80
AKOA intake manifold 15 mm SRE | Sachs 503 AB, ADV (A5669, A2180)
Ø inside: 15 mm · Manufacturer: AKOA · Material: Aluminum · Mounting type: Screws · Ø External connection: 20 mm · Hole spacing inlet: 36 mm · Alternative version of the Pony OEM number: A2180 · Alternative version of the Pony OEM number: A5669
EUR 57.10
AKOA decompressor M12x1.25 wide wall | Sachs 503 AB, AC, ADV (A2942)
Manufacturer: AKOA · Material: Steel · Surface: galvanized (blue) · Thread length: 8 mm · Total length: 66 mm · Width across flats SW: 15 mm · Area of application: Standard · Thread type: MF12x1.25 (fine pitch thread) · Pony OEM number: A2942
EUR 91.50
Collection only possible with online purchase and appointment.
