Racing clutch from HK Tuning suitable for Puch Maxi mopeds/mopeds with E50 engine.
The tuning clutch is equipped with a reinforcing ring, reinforced springs and Kevlar linings.
From the factory, this racing clutch is set to an engagement speed of 7200 rpm and balanced so that all the linings engage simultaneously.
In contrast to the previously available HK clutch with aluminum arms, this version uses steel arms. This results in more contact pressure and makes this racing clutch a must-have product for heavily tuned engines.
Thanks to the built-in starter clutch lining, your moped / moped can still be started without a pull starter.
Ø outer: 93.3 mm
Thickness: 21 mm
Number of jaws: 3 pieces
Material: steel
You can continue to use your original clutch basket or one of the accessories.
Quality product from the Dutch manufacturer HK Clutches.
Details
| Manufacturer | HK Clutches |
| Material addition | Aramid (known as Kevlar®) |
| Number of springs | 3 pcs |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Ø outside | 93.3 mm |
| Area of application | Racing, High End, Cross |
Suitable for the following models
| Puch | E50 |
Accessories & related products
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Manufacturer: HK Clutches · Material: Steel · Material addition: Aluminum · Ø outside: 93 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø inside: 13.6 mm · Ø inside: 14.6 mm · Thickness: 20.3 mm · Area of application: Racing
EUR 348.90
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Material addition: Steel · Surface: galvanized (blue) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø outside: 92.5 mm · Thickness: 19 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 213.80
Not in stock
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (known as Nirosta®) · Material: Steel · Material addition: Composite materials · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm · Thickness: 21.2 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 472.70
MBR clutch basket 19 teeth Racing angled | Puch E50
Manufacturer: MBR · Material: Steel · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 100.5 mm · Recording type: Interlocking · Toothing type: helical toothed · Color: silver · Number of teeth: 19 pcs · Ø Receptacle: 31.1 mm · Height: 49 mm · Area of application: Tuning
EUR 208.20
MBR clutch basket 18 teeth Racing straight | Puch E50
Manufacturer: MBR · Material: Steel · Recording type: Interlocking · Toothing type: straight toothed · Number of teeth: 18 pcs · Ø Receptacle: 31 mm · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 99.5 mm · Height: 49 mm · Area of application: Tuning
EUR 208.20
Clutch basket 21 teeth needle bearing lightened | Puch E50
Material: Steel · Area of application: Tuning · Color: graphite colors · Ø outside: 99.6 mm · Toothing type: helical toothed · Ø inside: 15 mm · Recording type: Interlocking · Number of teeth: 21 pcs · Height: 49.5 mm · Ø Receptacle: 30.5 mm
EUR 140.60
Moped fans like you also bought:
GPO gasket set | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Number of components: 7 pcs · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Area of application: Standard
EUR 11.20
Polini CP 21 mm carburetor (hand choke)
Manufacturer: Polini · Camouflaged: No · Component group Carburetor: Carburetor complete · Material: Aluminum · Carburetor type: CP · Nominal diameter: 21 mm · Ø Internal connection: 24 mm · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 21 mm · Ø Output inside: 21 mm · Ø Air filter connection: 46 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 72 · Size of secondary nozzle: 42 · Mounting type: Plug connection clamped · Total length: 73.5 mm · Width: 75 mm · Height: 135 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 168.80
MBR clutch basket 18 teeth Racing straight | Puch E50
Manufacturer: MBR · Material: Steel · Recording type: Interlocking · Toothing type: straight toothed · Number of teeth: 18 pcs · Ø Receptacle: 31 mm · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 99.5 mm · Height: 49 mm · Area of application: Tuning
EUR 208.20
MVT internal rotor ignition incl. rev limiter & light 12V | Puch / Sachs
Manufacturer: MVT Allumage · Manufacturer: swiing · Ø cable: 7 mm · Performance: 65 W · Direction of rotation: left · Number of fixing points: 2 pcs · Ø mounting plate: 96 mm · Tension: 12 V · Mounting type: Screws · Area of application: Tuning · Weight: 268 g · Ø Flywheel outside: 49.2 mm
EUR 410.80
swiing® ingenious pull starter | Puch E50 MVT ignition
Manufacturer: swiing® ingenious parts · Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Ignition system: MVT Allumage · Color: Chrome · Color: black-matt · Height: 82 mm · Ø outside: 130 mm · Width: 150 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Total length: 170 mm
EUR 168.80
Collection only possible with online purchase and appointment.
