Three clutch springs suitable for the Jammer racing clutch of your Puch Maxi S and N moped / moped with E50 engine.
These medium-strength springs for the centrifugal clutch change the clutch engagement behavior so that a higher speed is required until the clutch engages.
Note: We recommend stretching the springs once (pulling them into length) before installation so that the color loosens and the spring can function properly.
Other clutch spring sets and complete racing clutches can be found in the accessories section.
Quality product from the American manufacturer Jammer Clutches.
| Spring design | Tension spring |
| Ø inside | 7.4 mm |
| Ø wire | 1.6 mm |
| Manufacturer | Jammer |
| Leg length | 13.5 mm, 9.6 mm |
| Length spring hook | 10.8 mm |
| Material | Spring steel |
| Surface | varnished |
| Color | green |
| Ø outside | 11 mm |
| Total length | 37 mm |
| Area of application | Tuning |
| Puch | E50 |
Ratings
Accessories & related products
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Ø outside: 92.5 mm · Manufacturer: Jammer · Material: Steel · Material addition: Steel · Thickness: 19 mm · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 217.90
Not in stock
Jammer clutch 1st gear | Tomos A35, A55
Manufacturer: Jammer · Material: Steel · Material addition: Aluminum · Recording type: Interlocking · Number of jaws: 3 pcs · Number of springs: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Tomos OEM number: 227849
EUR 217.90
Not in stock
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Total length: 32.6 mm · Manufacturer: Malossi · Material: Spring steel · Surface: varnished · Color: red · Color: white · Color: yellow · Area of application: Tuning
EUR 34.30
GPO clutch spring set Jammer clutch "Stage 1" pink
Spring design: Tension spring · Ø wire: 1.1 mm · Ø inside: 7.7 mm · Ø outside: 9.9 mm · Total length: 34 mm · Manufacturer: GPO · Length spring hook: 8 mm · Length spring hook: 14 mm · Material: Spring steel · Surface: varnished · Color: pink · Area of application: Tuning
EUR 13.70
Explore categories from Clutch
Moped fans also bought
Not so nice 
15 mm intake manifold | Puch E50
Mounting type: Screws · Number of fixing points: 2 pcs · Material: Aluminum · Area of application: Tuning · Camouflaged: Yes · Total length: 47 mm · Ø inside: 14.5 mm · Hole spacing inlet: 38 mm · Height flange center hole: 43 mm · Total height: 54 mm · Ø External connection: 20 mm
EUR 13.70
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Material: Steel · Surface: blackened · Total length: 55 mm · Total length: 75 mm · Area of application: (Dis)assembly tool · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread) · Strength class: 8.8
EUR 11.40
Not in stock
Handlebar fork plate 35 cm curved with chrome strut
Manufacturer: Made in Germany · Mounting type: Fork plate · Material: Steel · Color: Chrome · Surface: chrome-plated · Width: 720 mm · Clamping diameter: 22 mm · Height: 350 mm · Fork plate holder length: 90 mm · Length handlebar ends: 150 mm · Ø outside: 22 mm · Crossbar: Yes · Ø Strut: 14 mm · Strut length: 260 mm
EUR 38.40
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Thickness: 1 mm · Manufacturer: swiing® revival parts · Number of fixing points: 4 pcs · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.50
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
