Clutch springs in three thicknesses for the Jammer clutch on your Puch and Tomos moped / moped.
As the original springs tend to break, they can be replaced by Malossi springs.
The springs are supplied in 3 thicknesses:
Weak (white): 2.25 mm, 32.65 mm
Medium (yellow): 2.28 mm, 32.3 mm
Strong (red): 2.42 mm, 32.0 mm
We recommend stretching the springs once (pulling them into length) before installation so that the color loosens and the spring can function properly.
You can find more clutch springs in the accessories section.
Quality product from the Italian manufacturer Malossi.
Spring design | Tension spring |
Material | Spring steel |
Total length | 32.6 mm |
Ø wire | 2.2 mm, 2.3 mm, 2.4 mm |
Manufacturer | Malossi |
Color | white, yellow, red |
Surface | varnished |
Area of application | Tuning |
Puch | E50 |
Tomos |
Accessories & related products
Jammer racing clutch special 65 ccm and more | Puch E50
Material: Steel · Thickness: 19 mm · Manufacturer: Jammer · Ø outside: 92.5 mm · Material addition: Steel · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Number of springs: 3 pcs
EUR 217.00
Not in stock
Jammer clutch 1st gear | Tomos A35, A55
Material: Steel · Manufacturer: Jammer · Material addition: Aluminum · Recording type: Interlocking · Number of jaws: 3 pcs · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of springs: 3 pcs · Tomos OEM number: 227849
EUR 217.00
Moped fans also bought
GPO sprocket 45 teeth black | Puch Maxi, Puch X30 NG-2AH
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: GPO · Number of fixing points: 6 pcs · Hole spacing: 36.5 mm · Material: Steel · Surface: powder-coated · Color: black · Number of teeth: 45 pcs · Ø mounting hole: 6.7 mm · Ø inside: 94 mm · Thickness: 4.5 mm · Hole spacing 2: 68 mm · Cranking (offset): 8 mm · Ø bolt circle: 105.5 mm
EUR 22.70
Airsal 44 mm cylinder kit 65 ccm camouflaged | Puch
Material: Aluminum · Surface: sandblasted · Nominal diameter: 44 mm · Manufacturer: Airsal · Number of fixing points: 4 pcs · Camouflaged: Yes · Crankshaft stroke: 43 mm · Displacement: 65 ccm · Ø cylinder neck: 48 mm · Area of application: Tuning · Ø piston pin (B): 12 mm · Inlet window: 24 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Hole spacing inlet: 38 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 102.70
swiing® revival 12 mm carburetor (original) | Puch
Nominal diameter: 12 mm · Width: 50 mm · Height: 108 mm · Manufacturer: swiing® revival parts · Total length: 65 mm · Mounting type: Plug connection clamped · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Color: gray · Carburetor type: SRE · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 52 · Ø Inside entrance: 12 mm · Ø Internal connection: 20 mm · Ø Output inside: 12 mm · Area of application: Standard · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.15 · Clamping screw torque (max.): 4 N/m
EUR 79.90
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Number of fixing points: 4 pcs · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Thickness: 1 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.45
swiing® ingenious pull starter | Puch E50 MVT ignition
Material: Plastic · Material: Steel · Surface: chrome-plated · Surface: raw · Color: Chrome · Color: black-matt · Total length: 170 mm · Width: 150 mm · Height: 82 mm · Manufacturer: swiing® ingenious parts · Ø outside: 130 mm · Number of fixing points: 2 pcs · Hole spacing: 138 mm · Ignition system: MVT Allumage
EUR 171.30
Not in stock