Racing clutch compatible with your Puch Maxi S / N moped equipped with an E50 engine.
This high-quality centrifugal clutch is suitable for racing and tuning applications. The clutch is constructed with three clutch plates and features a reinforcement plate that significantly increases stability. With the three included spring strengths, the clutch engagement characteristics can be adjusted to suit various engine setups. The weakest springs are already installed.
Package Contents:
• Racing clutch, 409 g•
White clutch spring set with 1.5 mm wire diameter•
Green clutch spring set with 1.6 mm wire diameter•
Yellow clutch spring set with 1.7 mm wire diameter
Notes: The clutch should be soaked in oil for 24 hours before installation so that the friction linings can become saturated with oil. After selecting the appropriate clutch springs for your engine, secure the M6 countersunk screws on the racing clutch with medium-strength threadlocker and tighten them to 6 Nm.
You can find the appropriate oil and threadlocker among the accessories.
A quality product from the American manufacturer Jammer Clutches.
Alternative to the original Puch part number: 349.1.12.504.0
| Manufacturer | Jammer |
| Material | Steel |
| Surface | burnished |
| Material addition | Composite materials |
| Area of application | Tuning |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Number of springs | 3 pcs |
| Ø inside | 12.5 mm, 13.9 mm |
| Ø outside | 92 mm |
| Thickness | 19.75 mm |
| Alternative version of the Puch OEM number | 349.1.12.504.0 |
| Puch | E50 |
Accessories & related products
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Height: 8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Thread type: MF10x1 (fine pitch thread) · Nominal diameter (thread): 10 mm · Drive: External hexagon · Width across flats: 17 mm
EUR 4.50
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Color: blue · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Area of application: Chemistry · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.10
EUR 2’510.00/l
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Color: sand-colored · Thickness: 0.5 mm · Manufacturer: swiing® revival parts · Number of fixing points: 4 pcs · Material: Sealing paper · Number of components: 1 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.30
Malossi replacement clutch springs Jammer clutch | Puch, Tomos
Spring design: Tension spring · Ø wire: 2.2 mm · Ø wire: 2.3 mm · Ø wire: 2.4 mm · Color: red · Color: white · Color: yellow · Total length: 32.6 mm · Manufacturer: Malossi · Material: Spring steel · Surface: varnished · Area of application: Tuning
EUR 34.30
GPO clutch spring set Jammer clutch "Stage 1" pink
Spring design: Tension spring · Ø inside: 7.7 mm · Ø wire: 1.1 mm · Length spring hook: 8 mm · Ø outside: 9.9 mm · Length spring hook: 14 mm · Color: pink · Total length: 34 mm · Manufacturer: GPO · Material: Spring steel · Surface: varnished · Area of application: Tuning
EUR 13.70
GPO clutch spring set Jammer clutch "Stage 2" blue
Spring design: Tension spring · Ø inside: 7.3 mm · Ø wire: 1.3 mm · Length spring hook: 8 mm · Ø outside: 9.9 mm · Length spring hook: 14 mm · Color: blue · Total length: 34 mm · Manufacturer: GPO · Material: Spring steel · Surface: varnished
EUR 13.70
Explore categories from Clutch
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Number of components: 7 pcs · Ø outlet inside: 19.9 mm · Decompressor: Yes · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44
EUR 11.40
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Diameter: 5.9 mm · Drive: External hexagon · Nominal diameter (thread): 6 mm · Total length: 106 mm · Thread length: 13 mm · Thread length: 18.5 mm · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.50
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Height: 8 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Thread type: MF10x1 (fine pitch thread) · Nominal diameter (thread): 10 mm · Drive: External hexagon · Width across flats: 17 mm
EUR 4.50
swiing® revival Screw Set, Engine, Galvanized, Small | Puch E50
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Hexagon socket · Screw head: Countersunk head · Screw head: Cylinder head · Screw head: Lens head · Puch OEM number: 900.1216 · Puch OEM number: 901.1308
EUR 11.40
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Color: sand-colored · Thickness: 0.5 mm · Manufacturer: swiing® revival parts · Number of fixing points: 4 pcs · Material: Sealing paper · Number of components: 1 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.30
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Color: sand-colored · Thickness: 1 mm · Manufacturer: swiing® revival parts · Number of fixing points: 4 pcs · Material: Sealing paper · Number of components: 1 pcs · Ø inside: 106 mm · Ø outside: 116 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.50
Working late? Evening hours on Thursday until 20:00
