Aluminum stroke plate for your Piaggio Ciao, Si, Bravo, Boxer, Boss, Grillo and Gilera moped / moped.
The spacer is mounted under the cylinder base. The "lifting" of the cylinder increases the intake and exhaust timing. Accordingly, the same distance of the spacer should be turned down at the top of the cylinder
so that the original crushing edge dimension and compression are maintained.
Material thickness: 4 mm
Material: aluminum
We recommend using Dirko silicone sealant for sealing. You can find this in the accessories
.
Details
| Material | Aluminum |
| Thickness | 4 mm |
Suitable for the following models
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
Malossi 43 mm cylinder kit 10 mm KoBo new version | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Malossi · Material: Gray cast iron · Surface: sandblasted · Area of application: Tuning · Displacement: 63 ccm · Nominal diameter: 43 mm · Crankshaft stroke: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.5 mm · Ø outlet inside: 18.3 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 10 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Decompressor: Yes · Camouflaged: No
EUR 165.90
Malossi 43 mm cylinder kit 12 mm KoBo new version | Piaggio Ciao, SI, Boxer, Bravo
Material: Gray cast iron · Manufacturer: Malossi · Surface: sandblasted · Camouflaged: No · Displacement: 63 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 43 mm · Ø cylinder neck: 45.6 mm · Ø Outlet outside: 22.4 mm · Ø outlet inside: 18.3 mm · Ø piston pin (B): 12 mm · Outlet type: clamped · Hole pattern [mm]: 55 x 34 · Number of fixing points: 3 pcs · Decompressor: Yes · Area of application: Tuning
EUR 165.90
Not in stock
Not so nice 
Olympia 43 mm cylinder kit 10 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Nominal diameter: 43 mm · Manufacturer: Olympia · Material: Gray cast iron · Camouflaged: No · Surface: varnished · Crankshaft stroke: 43 mm · Displacement: 63 ccm · Ø cylinder neck: 46 mm · Ø Outlet outside: 22.3 mm · Ø outlet inside: 17.8 mm · Ø piston pin (B): 10 mm · Number of fixing points: 3 pcs · Hole pattern [mm]: 35 x 55 · Outlet type: clamped · Area of application: Tuning · Decompressor: Yes
EUR 152.10
Not so nice
Olympia 43 mm cylinder kit 12 mm KoBo | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: Olympia · Material: Gray cast iron · Surface: varnished · Area of application: Tuning · Displacement: 63 ccm · Nominal diameter: 43 mm · Crankshaft stroke: 43 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 22.3 mm · Number of fixing points: 3 pcs · Ø piston pin (B): 12 mm · Outlet type: clamped · Decompressor: Yes · Camouflaged: No
EUR 152.10
Elring Dirko HT sealing compound gray (silicone) 70 ml permanently elastic up to 315°C
Manufacturer: Elring · Material: Silicone · Contents [ml]: 70 ml · Color: gray · Hazard warning: Causes damage to organs through prolonged or repeated exposure · Gap dimension (max.): 2 mm · Temperature resistance (min.): -60 - 315 °C · Area of application: Chemistry
EUR 22.80
EUR 325.71/l
Moped fans like you also bought:
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Drive: Slot · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Thread length: 4 mm · Total length: 6 mm · Screw head: Lens head · Ø outside: 5 mm
EUR 2.30
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Ø nipple: 6 mm · Nipple length: 5.5 mm · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2000 mm · Area of application: Standard
EUR 3.90
Fortune / Merrick 2.00-2.50 x 16/17" inner tube
Valve type: TR4 Auto valve · Manufacturer: Fortune · Tire width [inch]: 2 - 2.5 " · Tire width [mm]: 50.8 - 63.5 · Width [inch]: 2 · Width [inch]: 2 1/4 · Width [inch]: 2 1/2 · Tire height [%]: 100 · Old designation: 20 x 2 · Old designation: 20 x 2.25 · Old designation: 20 x 2.5 · Old designation: 21 x 2 · Old designation: 21 x 2.25 · Old designation: 21 x 2.5 · Wheel size [inch]: 16 - 17 " · Wheel size [inch]: 17 "
EUR 11.30
Bench seat long
Manufacturer: Made in Portugal · Ø Saddle tube holder: 22 mm · Material: Imitation leather · Material: Steel · Surface: galvanized (blue) · Surface: varnished · Color: black · Width: 180 mm · Spring-loaded: No · Height: 110 mm · Height: 170 mm · Lettering: No · Total length: 520 mm · Number of fixing points: 2 pcs
EUR 80.00
Not in stock
Collection only possible with online purchase and appointment.
