Special holding tool that simplifies work on the clutch or the ignition on your moped, moped and small motorcycle.
The matching bolt is pushed into the upper connecting rod eye and the plastic plate is used to cover the opening to the engine housing. When working on the flywheel, the bolt will then rest cleanly on the plate and the nut can be loosened and tightened without any problems.
The second picture serves to illustrate this.
With this simple tool, you save yourself the purchase of various different counterholders and have the right assembly tool to hand for all engines.
Alternative counterholders can be found under accessories.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Plastic |
| Diameter | 10 mm, 12 mm, 15 mm |
| Number of components | 4 pcs |
Ratings
Accessories & related products
swiing® ingenious flywheel holder 3 pins (Bosch / Ducati flywheels)
Number of components: 1 pcs · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: galvanized (blue) · Surface: rubberized · Diameter: 19 mm · Thickness: 5 mm · Ø Pin: 8 mm · Ø outside: 93 mm · Total length: 290 mm · Ø inside: 27 mm · Height: 80 mm · Area of application: Special tool
EUR 54.90
Moped fans also bought
Hot 
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Color: silver · Resistance: 1000 Ω · Subcategory: Spark plug connector · Suppressed: Yes · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.10
Magura cable clamp Ø 8 x 15 mm
Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Thread type: M6x1 (standard thread) · Width across flats: 7 mm · Ø outside: 8 mm · Ø Bundle: 6 mm · Total length: 15 mm · Screw head: Hexagon · Area of application: Standard · Drive: External hexagon · Drive: Slot · Thread length: 7 mm
EUR 2.85
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Manufacturer: Airsal · Camouflaged: Yes · Material: Aluminum · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Ø cylinder neck: 48 mm · Number of fixing points: 4 pcs · Inlet window: 23.5 / 20 x 15 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Area of application: Tuning · Outlet type: straight · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: Yes · Hole spacing inlet: 38 mm
EUR 114.50
Hot
Inner cable set automatic | Puch E50
Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Manufacturer: Made in Germany · Quantity: 4 pcs · Material: Steel · Total length: 1600 mm · Total length: 2200 mm
EUR 11.40
Cable set E50 engine automatic black | Puch Maxi S / N
Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Quantity: 4 pcs · Material: Steel · Color: black · Total length: 1600 mm · Total length: 2200 mm · Outer shell length: 6000 mm
EUR 22.40
swiing® revival rear brake anchor plate | Puch Maxi N
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø axle: 12 mm · Ø shaft: 10 mm · Ø External brake pads: 80 mm · Ø bore: 12.2 mm · Ø outside: 92 mm · Total length: 135 mm · Wide cam holder: 12 mm · Brake lever length (lever length): 68 mm · Cranking (offset): 10 mm · Ø screw holder: 6.5 mm
EUR 85.80
Collection only possible with online purchase and appointment.
