Base plate suitable for the three-jaw centrifugal clutch of Puch mopeds / mopeds with E50 engines.
The clutch carrier is made of steel and is extended. The mounting pins can be secured with circlips. In addition, M4 threads are cut into the pins so that a reinforcement plate can be fitted.
You can find the mentioned plate, clutch linings, complete clutches and the clutch hub without threaded holes in the accessories section.
Original Puch spare part number: 349.1.12.504.2
| Material | Steel |
| Area of application | Standard |
| Number of jaws | 3 pcs |
| Recording type | Cone mounting |
| Thickness | 19.1 mm |
| Ø inside | 11.85 mm |
| Ø outside | 92.6 mm |
| Puch | E50 |
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: blue · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Number of components: 3 pcs
EUR 20.50
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Manufacturer: HK Clutches · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Material addition: Composite materials · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs · Thickness: 21.2 mm · Ø inside: 12 mm · Ø inside: 14.6 mm · Ø outside: 93 mm
EUR 481.80
EUR 424.40
Hot 
DMP clutch "Racing" aluminum reinforced | Puch E50
Manufacturer: DMP · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Material: Steel · Material addition: Chrome steel (colloquially known as stainless steel) · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs · Thickness: 22 mm · Ø outside: 94 mm
EUR 137.60
Explore categories from Clutch
Moped fans also bought
GPO Gasket Set for E50 Engine | Puch Maxi S, N
Manufacturer: GPO · Area of application: Standard · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Number of components: 7 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 11.40
swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage
Bearing type: Needle roller and cage assembly · Bearing cage: Silver cage · Manufacturer: swiing® ingenious parts · Width: 16.2 mm · Ø inside: 12 mm · Ø outside: 15 mm · Dimension needle bearing: 12/15 x 16.2 · Tomos OEM number: 035548
EUR 16.00
swiing® revival nut / spring washer clutch E50 | Puch Maxi
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.8D · Nominal diameter (thread): 10 mm · Drive: External hexagon · Height: 8 mm · Width across flats: 17 mm · Thread type: MF10x1 (fine pitch thread)
EUR 4.50
Hot
ASP clutch conversion kit "woven" 3-jaw Aramid | Puch E50
Manufacturer: ASP · Area of application: Racing · Area of application: Tuning · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Number of jaws: 3 pcs · Number of springs: 6 pcs · Thickness: 12 mm
EUR 206.40
Not in stock
Working late? Evening hours on Thursday until 20:00
